Jump to content
SAU Community

-

KummaZ
 Share

Recommended Posts

  • 2 weeks later...
  • 2 weeks later...
shyskyline Enthusiast

shyskyline

Posted
Posted
hey mate nice ride.. i understand wat u are going thru, trying to sell mine, which is pretty much similar to urs, and it aint easy... even for a price like ur asking :P

hey mate how much you want for your car bro???????

and r u located in syd???

pm me and let me know hey

cheers.

Link to comment
https://www.sau.com.au/forums/topic/161615--/#findComment-3046962
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
ookami Experienced

ookami

Posted
Posted

I was the original owner and importer of this car, and can confirm it has had way more than what he's asking spent on it. The Radiator is a Koyo and the manifold is a genuine HKS one - was originally a HKS2835 Pro S kit when i owned the car (made 250rwkw on 1 bar). The exhaust is full Trust system bar the custom dump pipe - HKS wouldn't let the wastegate open properly. It was not sold by autcion and was a private sale in japan. I've got the japanese vehicle report here somewhere if someone is interested.

Link to comment
https://www.sau.com.au/forums/topic/161615--/#findComment-3114341
Share on other sites
KummaZ Enthusiast

KummaZ

Posted
  • Author
Posted

Thanks for the extra info man.

Looks like I'm getting jerked around too much for this sale so I think I'm going to keep it unless I get what I am asking for it.

I've got Saity's kit to go on it and some gold 18" gt-c' which are going to be here in a week or 2.

Link to comment
https://www.sau.com.au/forums/topic/161615--/#findComment-3116113
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...