Jump to content
SAU Community

Recommended Posts

Hey guys, might be buying some nismo injectors of a mate. he has them in his R32 GTR Rb26dett.

He is looking to upgrade to some 700cc and i want to upgrade my stockers..

seeing as how people use the GTR 444cc injectors from a gtr engine into a rb20det..;

will these nismo one fit straight in?

Cheers

RB26 and RB20 are differrent impedance, so fitting GTR injectors into RB20 requires th RB26 resistor pack to match the resistance to a level the RB20 ECU wants to see.

well depending on how much you wana spend etc, to run gtr injectors in an rb20 you need resistor pack, even the 550's in your mates gtr would have it wired with a resistor pack *from standard*... the injectors are fine to use, no you dont need a purpose built rb20 injector, just the 550's with a resistor pack..

i dont understand why u need an GTR resistor pack on an RB20 for these injectors to run?

does the rb20 not have its own ecu and resistor pack settings?

i dont like the idea of having to buy not only 500 worth of injectors but 200 resistor pack as well..

so does this then mean the only other option is finding rb20det spec injectors? so that ther gtr resistor pack does not have to be used.?

Regards, Adam

THe R32 GTR and GTST ecu's are designed to run high impediance injectors.

The GTR injectors are all low impediance, as not to damage the ecu's injector drivers you must run a resistor pack (~5.2-5.8ohms).

Failure to run a resistor pack will most definitely kill your ecu.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...