Jump to content
SAU Community

Help Me Fellow Linerz!

32JEZ

By 32JEZ,
in Queensland

 Share

Recommended Posts

32JEZ Rising Star

32JEZ

Posted
Posted (edited)

Hey Fellow LinerZ! :)

Has anyone got or know of anyone that has an rb20det low with low k's thats in very good nick or an rb25det r33 front cut? anyone on the gold coast or close that could help me purchase one of these options and install it? i just wanna learn how everything works :D

i cant really get that learning curve happening if i just take it so some random mechanic to do it ;) they just say piss off and come back next week! and i dont learn anything! if anyone has the time please don't hesitate :)

i still don't know what to do with my options which one would be the best??

Budget is $6000

My Options

_____________

- i either get and rb20det and get some forged bits n pieces/parts and get it all tuned up like a s**t OR

- get an rb25det r33 front cut and do the whole 25 conversion.

CONTACT ME

______________

Mobile : 0401 401 949

MSN Messenger: [email protected]

Cheers <o/

Edited by 32JEZ
Link to comment
https://www.sau.com.au/forums/topic/162003-help-me-fellow-linerz/
Share on other sites
Demoniak Proficient

Demoniak

Posted
Posted
I don't have time or know how to do it

but my advise would be if you are gonna do it

you might as well get an RB25!

They are heaps better

didnt you just get your car jesse?

Wasnt yours the one with all the monza parts in it?

what happened?

Keegs Grand Master

Keegs

Posted
Posted

You should refer to the other thread you started, plenty of people who posted in there have done this conversion. Also look to forced induction, there are many threads explaining what to do, with pics. At the end of the day, unless you can convince someone to help you for seriously low money (like 1k) the reality is the rb25 is just going to be out of your price range. You don't know enough about your car/engines to do this yourself, regardless of how much you read. If I was you, i'd take my car to a mechanic and get a new rb20 put in, and do as much else as you can with your money whilst it's there....if you want to spend the rest of the money that is. Otherwise you'll end up with a car thats off the road for a long, long time.

Just my 2c

Matt

The Dan Grand Master

The Dan

Posted
Posted
Hey Fellow LinerZ! :glare:

Has anyone got or know of anyone that has an rb20det low with low k's thats in very good nick or an rb25det r33 front cut? anyone on the gold coast or close that could help me purchase one of these options and install it? i just wanna learn how everything works :D

i cant really get that learning curve happening if i just take it so some random mechanic to do it :happy: they just say piss off and come back next week! and i dont learn anything! if anyone has the time please don't hesitate :glare:

i still don't know what to do with my options which one would be the best??

Budget is $6000

My Options

_____________

- i either get and rb20det and get some forged bits n pieces/parts and get it all tuned up like a s**t OR

- get an rb25det r33 front cut and do the whole 25 conversion.

CONTACT ME

______________

Mobile : 0401 401 949

MSN Messenger: [email protected]

Cheers <o/

I can get you the engine for 2k or a 33 front cut for 4k but don't have the time to fit or explain suck squeeze bang blow tick tock doof doof.

Demoniak Proficient

Demoniak

Posted
Posted
Im not jesse... :dry:

Im Zennon :(

that wasnt meant to you.. it was meant to jesse..

and i did check.. you did just get that r32 jesse.. why the rebuild.. did the original one go bang bang.. or you want to do a rebuild just cause?

shanef Grand Master

shanef

Posted
Posted
piston gtfo'd and killed other stuff rofl... aka bang bang :(.. iv decided to try and looks for and rb20 and do the internals and a bigger turbo ect.. thanks <3

annoy that big poof up there (dan aka 3lit3 32) caus he can supply you with ALOT if not all the parts ur after, he's jsut really busy.

i recently put an rb25 in a 33 (bought from dan), wasnt too hard, only took 10hrs to take old one out, swap parts over and fire the new one up

Demoniak Proficient

Demoniak

Posted
Posted
annoy that big poof up there (dan aka 3lit3 32) caus he can supply you with ALOT if not all the parts ur after, he's jsut really busy.

i recently put an rb25 in a 33 (bought from dan), wasnt too hard, only took 10hrs to take old one out, swap parts over and fire the new one up

Provided you got the parts// and the extra people // and the extra grog to do so..

your becomming my new best friend shane.. you got a pillar :sick: (or did you hire the extra stuff you needed for the day?)

mmmmm

curious though.. you wouldnt happen to have a spring condesner lying around too would ya?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...