Rb20 Afm Some Questions For The Wizz's

[R32-PSH77]

Hey guys a few questions

Currently im about to have my car tuned.

1) will the standard Rb20det have enough " power " whatever it is that maxes them out.. to flow and be mapped for 300 RWHP?

I suppose it would come down to also the tuner aswell?

this would be on a power FC with supporting mods and obviosuly a larger turbo.

2) What is the absolute MAX that people have amnaged to push out of a RB20DET AFM

3) what is the max umm Mv (millivolt???) reading that the rb20 can see

4) currently the turbo surges, under laod, people say could be the mass amount of air it runs low down.. it over loads the enigne.. so how can i see if im maxing out the afm udner load.. whats the highest it can read before its maxed i guess is what im asking. .so i can refer to the power fc hand controller whilse its under load.

i know Z32 would be ideal.. but dont wanna have to shell out another 300 bucks if i dont need to to get to 300hp at the rears.

Thank you.

Regards, Adam

[CEF11E]

Mine maxes out at around 210rwkw. and reads 5.05 volts the car is making 240rwkw. the AFR's are a dead flat line as the VE goes down at higher revs.

I am going to check it again in the colder weather to see if it is still fine.

300hp will be ok with the stock afm. it will max out but only by around 20hp and your AFR will not chance more than 1/2 1 afr.