Jump to content
SAU Community

Recommended Posts

exhaust system

fmic

power fc or other ecu

fuel pump

550cc injectors

z32 afm

coilpacks

injectors

cai

and a bigger turbo.. something response like a hks 2530 should be fine on about 16-17 or so psi?

important thing, a really good tune

;)

Edited by readyGO
Link to comment
https://www.sau.com.au/forums/topic/162513-chasing-250rwkw/#findComment-3018655
Share on other sites

  • 2 weeks later...

The turbo i'll choose for this particular application would be a HKS GTRS.

Reason for choosing this turbo would be:

-Capable of producing more power than the HKS 2535

-Newer design, spools up just as well as a HKS 2535 if not better

Cons would be:

-May not produce as much as a HKS 2835 Pro S but it comes bloody close

If response is what your after than GTRS is the turbo your after but if your chasing that extra KW than the 2835 Pro S

Personally i'll go the GTRS but the down side is the price.

Link to comment
https://www.sau.com.au/forums/topic/162513-chasing-250rwkw/#findComment-3046833
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
×
×
  • Create New...