Jump to content
SAU Community

Apexi FC Tuned For $2200?


Recommended Posts

Guest INASNT

u can get new pfc and hc from greenline for around$1450 now!

Where do u think all the aus shops get there stuff from?? they just add their 30% profit margin to the stuff and sell it here!

I am getting all my stuff from japan, u save big bucks.

and nengun is the 1 i got my pfc from 2

Hey just thought I'd add a bit to this post I ordered my PowerFC, Hand controller and Boost controller (also bought exhaust cam gear) from nengun got it bout a week ago. Got all the above for 155000 yen which worked out to be roughly 2114.69 Tried greenline aswel but Nengun were cheaper in the end and they have better insurance for the postage. Gonna go see my mechanic today to sort out installation and tuning prices.

Good luck with yours

Chris

Guest Sim32

hmm 2200 i know whereu got that quote. start in a c?

ha ha..does very good work but, at a price however..

2200 for AVCR...id rather spend that sorta dosh on a ful sik 2530 or something, but thats just me..

im pretty sure u can get it installed and dynoed for 1800

tried fast and the furious? Kp performance? hardcore race, mazfix?

heaps of joints, just shop about and price match :P

Guest 382 GZV - 4 Door R33

Sim,

did you check out the place?

I am just going to put in the new PFC for a while and run base map. In July, have to go up to Gladstone for Uni placement - there a guy up there who's s'pose to have set up heaps of PFC's (and loves them). Apparently, he does it for $280 on dyno and all so that means a total $1665...pretty happy with that.

Steve

<><

Guest INASNT
Originally posted by 382 GZV - 4 Door R33

Sim,

did you check out the place?  

I am just going to put in the new PFC for a while and run base map. In July, have to go up to Gladstone for Uni placement - there a guy up there who's s'pose to have set up heaps of PFC's (and loves them). Apparently, he does it for $280 on dyno and all so that means a total $1665...pretty happy with that.

Steve

<><

do not run with the pfc base maps, they r tuned for 103 octane fuel and your car will ping and the check engine light will keep flashing

Guest 382 GZV - 4 Door R33

Really?

I had only thought of running the base maps (as seen in HPI 21 P.29) because I thought it erred on the safe (rich) side. I don't think I'd run base maps if they will stuff my car up - should I retard a little at first or wait for full tune or are is the map 'OK' to run?

Steve

Guest INASNT

i just pulled my safc out and am running the stock comp while my pfc sits in my room. I was told that even the base pfc maps since they r for 103 octane fuel are no good even with 98 octane fuel since the maps r so aggresive. U could always change the maps to make em less agressive but i wouldnt take the chance.

Guest INASNT
Originally posted by 382 GZV - 4 Door R33

Hey inasnt...since your's is 2nd hand from nengum (japan) wouldn't that mean that the map already on it was tuned to suit some modded skyline in japan? Or was it base map just like what comes on new PFC?

Steve

dont know, but its quite simple to put it back to factory once installed! u got a h/c also dont u?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...