Jump to content
SAU Community

Recommended Posts

Hey fellas,

Ive got 2 sets of rims for sale. Both sets without tyres and are in good condition, dont need em anymore. Im in Sydney

First set, 16 inch, no dings/buckles/cracks etc-, little bit of gutter rash, got about 4cm of dish, 5 stud multifit ie. 5 x 100, 5 x 114.3

$270

Second set, 16 x 7 inch chromies, no dings/buckles/cracks etc-, tiny amount of gutter rash not even noticable, chrome is flaking off a little bit near the valve stems, 5 stud multifit, ie 5 x 100, 5 x 114.3, +38 Offset no centre caps.

$270

P3310037.jpg

P3310038.jpg

P3310039.jpg

P4010041.jpg

P4010042.jpg

Edited by killabeez
hey, im interested in the 1st set, are they very heavy? (compared to say 33 stockers?) are spacer or hub adaptors required to fit on R33?

The wheels are wuite light, ill weigh one this arvo, I dont think spacers are required but ill have a look for the offset, if not ill measure it up and work out the offset.

The wheels are wuite light, ill weigh one this arvo, I dont think spacers are required but ill have a look for the offset, if not ill measure it up and work out the offset.

Wheels are around 9kg each, if they dont clear the brakes then ill give you your money back

Edited by killabeez
  • 2 months later...

shit forgot I had this thread up here, price drop people need em gone $290 each firm. I dont know what car they came off, I bought em for a subaru but got rid of the car before I had a chance to find tyres for em. looks like a fairly good offset tho with that amount of dish

mate whats the offset (1st set) and also with the stud pattern is it 114.3 or the flat 114? also willing to ship interstate?

Edited by cheez
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...