Jump to content
SAU Community

Recommended Posts

1999 Toyota Hilux Turbo Ute

Bugger.jpg

Car Sales Link

Price $25,000

Kilometres 78,000

Body 2 door 3 seat CAB CHASSIS

Colour Cherry Black

Interior Colour Black/Grey

Transmission 5 speed Manual

Drive type Rear

Engine 4 cylinder Unleaded Multi-point injected 2.7L (2694cc)

Reg Plate 552JRC

Reg Expiry AUG-2007

Extract:

Original 15SLO Hilux featured in Zoom magazine a few years back.

Now known as the 'Bugger' Hilux, won Street RWD class at the 2006 Fast Fours Jamboree.

11.7 at 115MPH originally done on slicks with the original owner. With new setup, and on street radials has cracked a 12.6 at 111MPH at the 2007 mini-jam.

Details:

stock motor, decompressed to 8.4:1

GT35R with Tial 44mm wastegate, on custom manifold done by Signature Performance.

Microtech LT8S ECU

Bosch pump+surge tank

550cc injectors with Malpassis 2:1 rising rate regulator

ARE cored Front mounted intercooler

AFCO racing radiator

W58 Supra gearbox (rebuilt 6 months ago)

Cressida LSD into standard hilux carrier (rebuilt 6 months ago)

ConvoPro rims front and rear, running 205's front and 295's rear

Recaro Seats

and much much more.

Have receipts for most work done.

Car is currently daily driven, and returns on average 11L/100. And does 12's in its current state. More in it with a clean up of the tune.

Car will come without stereo and tuning gear.

Car will come with spares accumulated since purchase.

Car is also engineered for modifications in QLD.

Not interested in trades, and in no hurry to sell but am negotiable on price... If sold, car will be sold with RWC on deposit unless otherwise negotiated.

Joy riders and tire kickers will be treated with the respect they deserve and should look elsewhere.

Contact me via PM for more details or give me a call on 0417 761 995

Edited by -==L=a=N=c=E==-
Link to comment
https://www.sau.com.au/forums/topic/163065-15slobugger-toyota-hilux-turbo-ute/
Share on other sites

For those that have PM'd me about insurance costs and problems getting insurance.

I currently have the car with full comprehensive insurance with all listed mods with Justcars at $800pa. Cheaper then most imports.

Had a few PM's on if i can remove things to make the price a bit cheaper.

Price can be further reduced by removing a few items off the car.

Turbo, wastegate & manifold - I still have the original manifold and dump pipe to fit a t3/t4 turbo with internal gate. Originally had a VG30DET highflow, but any turbo off a Nissan with a T3 flange will fit. Will need turbo, oil return, coolant lines, boost pipe, intake pipe, air filter and fitting. take $3000 off the price.

Radiator - i still have the original radiator in perfect condition. Only upgraded due to larger turbo. take $500 off the price

Wheels - have access to stock hilux steelies to replace the ConvoPro's. take $500

So if you went with the above options, you can get another $4000 off the price of the car.

Edited by -==L=a=N=c=E==-
  • 2 weeks later...
  • 2 weeks later...
  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...