Jump to content
SAU Community

Swap: R34 Nismo Clear Side Blinkers For R34 Front Bar Mesh

walkoau

By walkoau,
in Wanted to Buy

 Share

Recommended Posts

walkoau Mentor

walkoau

Posted
Posted

hi guys

as the title states i have a set of r34 nismo clear side blinkers (also r33 GTR) and im willing to swap them for some mesh off an r34 nismo/altia front bar, the section i need is circled in the pic but either side will work for me.

thanks

Justin

post-1416-1175680374.jpg

walkoau Mentor

walkoau

Posted
  • Author
Posted
I might have , what are the measurements , hight and width ? Brad

Hi Brad

measurements are 390mm X 140mm. mate i would appreciate it sooo much if you have a piece for me to buy off you or you want to swap for clear blinkers.

just be sure its genuine nissan r34 mesh. its steel mesh with a black plastic coating. i need it asap for my smash repairer to finish the job on my car.

thanks mate

Justin

walkoau Mentor

walkoau

Posted
  • Author
Posted
edited

edited???? what did you edit? anyway thread can be closed now.. i got what i needed now, a big thanks to Brad.

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

well considering it's all said and done, i didn't want to ruin any impending transactions.

but i edited out the fact that clear side indicators are very $$ relative to what they are, and mesh, is well.... not. Bunnings could help you out with the mesh for very little $

i didn't think it was a very fair swap that's all. It's just mesh! not exactly a Nismo item...

walkoau Mentor

walkoau

Posted
  • Author
Posted
well considering it's all said and done, i didn't want to ruin any impending transactions.

but i edited out the fact that clear side indicators are very $$ relative to what they are, and mesh, is well.... not. Bunnings could help you out with the mesh for very little $

i didn't think it was a very fair swap that's all. It's just mesh! not exactly a Nismo item...

yeah i get what you mean but i had to offer something with good value to even get ppl interested, as it turned out the nismo mesh is really hard to find, (its "steel" mesh not alloy and coated in black plastic) esp the paticular r34 section that i needed from a nismo bar ( the piece i ended up getting was from an r32 not perfectwith r34 mesh but pretty close). anyway didnt end up even swapping the blinkers for the mesh, the guy i bought the mesh off wanted $50 so all happy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • foney
      Cheap Gtr For Sale

      By foney · Posted

      BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
×
×
  • Create New...