Jump to content
SAU Community

Recommended Posts

Hey Guys,

Anyone know if Kutsie can tune a Power FC D - Jetro in my 32 GTR ?

Anyone down here used one of these in their cars yet?

I am keen to get rid of my Airflows and hunt some more power

I don't wanna take my car to melbourne just for a tune :)

All help much appreciated

Thanks

Robert

Link to comment
https://www.sau.com.au/forums/topic/164128-pfc-d-jetro/
Share on other sites

why not use AFM's? The D-Jetro isn't the best MAP sensor ECU out there (s**t to tune), if you realy want to go to a MAP sensor, i'd get an Autronic, or Haltec, and at that stage you've spent more than a PFC + bigger AFM's.

Link to comment
https://www.sau.com.au/forums/topic/164128-pfc-d-jetro/#findComment-3047170
Share on other sites

thanks guys everyone has said the same thing thanks very much for the imput! just thought it would be the way to go as more flow less restriction and less electronics to stuff up

Anyone have any ideas how much it costs to tune when first bought, with bigger injectors and adjustable cam gears, just so i have an idea how much to budget?

Link to comment
https://www.sau.com.au/forums/topic/164128-pfc-d-jetro/#findComment-3049958
Share on other sites

thanks guys everyone has said the same thing thanks very much for the imput! just thought it would be the way to go as more flow less restriction and less electronics to stuff up

Anyone have any ideas how much it costs to tune when first bought, with bigger injectors and adjustable cam gears, just so i have an idea how much to budget?

Roughly ~$150 an hour as an idea.

If you are serious about Nick tuning your car PM me.

Link to comment
https://www.sau.com.au/forums/topic/164128-pfc-d-jetro/#findComment-3053665
Share on other sites

Well yet to order the computer will be doing it over the next two weeks after the coilovers go in,

I was under the impression the Airflow meters are going to be an ongoing problem with aftermarket turbo's and high boost levels and as everyone is aware they are not the kinda thing you wanna be replacing on a 6 monthly basis

Maybe X - Rated should shed some light on how long this kind of thing lasts on a large power basis, did you or Sav Man ever have to replace these after buying new ones and running for a whilst with a PFC?

Has anyone had a Haltec or Autronic ECU installed down here with success?

I would hate to be the first one to be bitten in the arse just by trying something new!

Have priced a Wolf V500 ($2350) err to expensive compared to what other companys are offering for lower prices

Link to comment
https://www.sau.com.au/forums/topic/164128-pfc-d-jetro/#findComment-3053732
Share on other sites

I have had my Nismo AFM's for 2 years now, not 1 problems. one of my std AFM's died just after I got the car (due to age) that's why i went Nismo's. Our Targa car has 318rwkw, and has been raced all it's life, and it still has it's standard AFM's (and it runs a PFC), you just have to make sure your air filters are doing there job (and not over oiling them), and AFM's last for ages.

Link to comment
https://www.sau.com.au/forums/topic/164128-pfc-d-jetro/#findComment-3068977
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...