Jump to content
SAU Community

Recommended Posts

swiss automotive in mosman park(ask for francois) specialise in those sort of cars and do heaps of ferraris etc and i think they service that particular car but they are usually 3-4 wks booked out in advance but if you call them and let them know probs squeeze you in.

Seen that car around a fair bit. You do get what you pay for with the TVR's , the engines aren't the best thing about them. A full service history and nothing less is what I'd be asking for.

This one looks better;

http://www.carpoint.com.au/used-car/TVR/CH...es/2238580.aspx

or this one if he wants something with very few kms and performance upgrades;

http://www.carpoint.com.au/used-car/TVR/CH.../csn393250.aspx

TVR's aren't cars you go buying on the 'budget' as they say.

I have my suspicions about that yellow one. New engine and respray 2 years after manufacture says serious crash to me.

He's already looked at the silver one. He hasn't told me what he thinks about it except to ask me to find others for sale. I think maybe he thinks it's overpriced.

The green one does come with full service history and log books. 2 owners. 1st had it as one of a stable of about 8 cars, 2nd owner had every fluid replaced as well as the bushes and even did the timing belt despite only having very few k's on it which is probably a good sign.

Thanks guys.

I have my suspicions about that yellow one. New engine and respray 2 years after manufacture says serious crash to me.

He's already looked at the silver one. He hasn't told me what he thinks about it except to ask me to find others for sale. I think maybe he thinks it's overpriced.

The green one does come with full service history and log books. 2 owners. 1st had it as one of a stable of about 8 cars, 2nd owner had every fluid replaced as well as the bushes and even did the timing belt despite only having very few k's on it which is probably a good sign.

Thanks guys.

Hi Abo Bob,

The silver one is priced right.

I think I remember the yellow one used to be blue (haltech etc), it was for sale at a higher amount ($80k), a year or so ago if it's the same car.Not to mention and it was a 5 litre too from memory. I would be inclined to ping an email asking if the car used to be blue and if it's a factory TVR 5.0.

You need to be very careful when buying a TVR interstate as there are several Monarch ones. No big deal if you are buying from your own state and you live in a state where you don't need to go over the pits for rego every year (like WA). But, if you need to re-register a car from an interstate purchase then it's a probelm. The only cars to look at are the personal import pommy ones. Unfortunately the places the Monarch ones are common are WA and SA, like I said no big deal if you live there but, if you live in NSW or Vic then it may prove a problem?

Arkon,

The TVR's are very fast, at 1000kg, they have space frame chassis and the base model 4.0 cerbera does this to the average pack of super cars. There is a higher power 4.2 and 5.0 version too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
    • This is how I last did this when I had a master cylinder fail and introduce air. Bleed before first stage, go oh shit through first stage, bleed at end of first stage, go oh shit through second stage, bleed at end of second stage, go oh shit through third stage, bleed at end of third stage, go oh shit through fourth stage, bleed at lunch, go oh shit through fifth stage, bleed at end of fifth stage, go oh shit through sixth stage....you get the idea. It did come good in the end. My Topdon scan tool can bleed the HY51 and V37, but it doesn't have a consult connector and I don't have an R34 to check that on. I think finding a tool in an Australian workshop other than Nissan that can bleed an R34 will be like rocking horse poo. No way will a generic ODB tool do it.
    • Hmm. Perhaps not the same engineers. The OE Nissan engineers did not forsee a future with spacers pushing the tie rod force application further away from the steering arm and creating that torque. The failures are happening since the advent of those things, and some 30 years after they designed the uprights. So latent casting deficiencies, 30+ yrs of wear and tear, + unexpected usage could quite easily = unforeseen failure. Meanwhile, the engineers who are designing the billet CNC or fabricated uprights are also designing, for the same parts makers, the correction tie rod ends. And they are designing and building these with motorsport (or, at the very least, the meth addled antics of drifters) in mind. So I would hope (in fact, I would expect) that their design work included the offset of that steering force. Doesn't mean that it is not totally valid to ask the question of them, before committing $$.
×
×
  • Create New...