Jump to content
SAU Community

Recommended Posts

PICS

Item: RB26 Sump/front dif, complete with Tomei baffel kit.

Description: good condition, comes with Tomei sump baffel kit installed.

Price: $520

Item: Apexi air filters + apexi adapter pipes

Description: good condition, few scratches on pipes

Price: $110

Item: New RB26DETT Head Gasket

Description: Brand new Nissan head gasket to suit RB26 motor

Price: $50

Item: R32 GTR Standard front pipe

Description: Standard item, few scratches.

Price: $50 $20

Item: Tomei 1.2mil metal head gasket for RB26

Description: Brand new - cost me $464.65

Price: $320

Item: Reconditioned RB26DETT Head

Description: Rebuilt at Gavin Woods. Has Tomei cams already installed. Ready to drop onto an RB26 block. Looks great!

Price: $2900

Item: CP Pistons for RB26 - 87mil

Description: These are also Brand new, comes with all rings/pins. Comes in box ready to go.

Price: $1050

Item: Highmount manifold for RB26

Description: Cost $1200 new... Still basically new like everything else. The wastegate flange has now been cut off so you can have one welded on to suit your wastegate.

Price: only $770

Item: Custom intake for single turbo Rb26

Description: Looks great. Made at Godzilla Motorsport. Comes with silicon hose and clip, ready to instal.

Price: only $170

Item: RB26 Big end bearings - Brand new.

Description: New, in box. Cost $85.15 new

Price: $60

Item: RB26 Main bearings - Brand new.

Description: New, in box. Cost $173.80 new

Price: $135

Item: REV Billet conrods for rb26

Description: These were in my RB26 before the number 2 bearing spun. You can see a few marks on the no.2 rod. and you can see where it overheated. The others are fine, so may want to get no2 looked at or buy a new one seperatly.

Price: $170

Item: Exedy Clutch

Description: From my R32 GTR. I had this clutch installed before it went on the dyno. So has done basically no kms.

Price: $700

Item: Revolution Billet Flywheel

Description: I go tthis at the same time as the clutch.

Price: $170

Item: 82ERK Number plates - BZERK

Description: Never fittd to a car, Never registered. Navy blue writing on a silver plate.

Price: $900

PICS

Item: RB26 Sump/front dif, complete with Tomei baffel kit.

Description: good condition, comes with Tomei sump baffel kit installed.

Price: $520

Item: Apexi air filters + apexi adapter pipes

Description: good condition, few scratches on pipes

Price: $110

Item: New RB26DETT Head Gasket

Description: Brand new Nissan head gasket to suit RB26 motor

Price: $50

Item: R32 GTR Standard front pipe

Description: Standard item, few scratches.

Price: $50 $20

Item: Tomei 1.2mil metal head gasket for RB26

Description: Brand new - cost me $464.65

Price: $320

Item: Reconditioned RB26DETT Head

Description: Rebuilt at Gavin Woods. Has Tomei cams already installed. Ready to drop onto an RB26 block. Looks great!

Price: $2900

Item: CP Pistons for RB26 - 87mil

Description: These are also Brand new, comes with all rings/pins. Comes in box ready to go.

Price: $1050

Item: Highmount manifold for RB26

Description: Cost $1200 new... Still basically new like everything else. The wastegate flange has now been cut off so you can have one welded on to suit your wastegate.

Price: only $770

Item: Custom intake for single turbo Rb26

Description: Looks great. Made at Godzilla Motorsport. Comes with silicon hose and clip, ready to instal.

Price: only $170

Item: RB26 Big end bearings - Brand new.

Description: New, in box. Cost $85.15 new

Price: $60

Item: RB26 Main bearings - Brand new.

Description: New, in box. Cost $173.80 new

Price: $135

Item: REV Billet conrods for rb26

Description: These were in my RB26 before the number 2 bearing spun. You can see a few marks on the no.2 rod. and you can see where it overheated. The others are fine, so may want to get no2 looked at or buy a new one seperatly.

Price: $170

Item: Exedy Clutch

Description: From my R32 GTR. I had this clutch installed before it went on the dyno. So has done basically no kms.

Price: $700

Item: Revolution Billet Flywheel

Description: I go tthis at the same time as the clutch.

Price: $170

Item: 82ERK Number plates - BZERK

Description: Never fittd to a car, Never registered. Navy blue writing on a silver plate.

Price: $900

You have mail bro.

added parts:

Item: HKS Pod filters

Description: Nothing wrong with them at all

Price: $110

Item: RB26 Alternator

Description: RB26 Alternator in good condition

Price: $100

Item: RB26 Water pump

Description: Bought it for rebuild, used only for short time on dyno

Price: $100

pics for these are at the same link in 1st post

Tomei head gasket sold

New items:

HKS stainless steel cat back exhaust

Very quiet and sounds good.. nice looking muffler

$650

Hiflo cat

steel fins

$150

  • 3 years later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...