Jump to content
SAU Community

Recommended Posts

i had a bit of a pinging problem earlier and decided to run a colder spark plug to bring cylinder temps down.

im currently running 7's gapped at 0.85mm however even after 2-3 days they become fouled. almost impossible to start in the mornings and run like crap for about 5-10minutes.

would this indicate that in fact my car is not suited to running 7's and i should go back to 6's? or is there some adjustment i can make to the spark plug gap? i have a feeling my car just doesnt like the colder heat range plug...

any thoughts?

cheers

adam

Link to comment
https://www.sau.com.au/forums/topic/16611-running-7-heat-range-spark-plugs/
Share on other sites

Probably too cold.

I ran my GTS on 8s for a while. When I decided to go back to 6s, I had the engine idling for very short periods (less than a minute), and when I pulled the plugs, they were black with carbon.

You could try opening the gap a bit to ensure a stronger spark.

yeh ive opened them up to 0.9mm...

but they still foul really easily and make driving the car when its cold an absolute nightmare.

is there any advantage in running 7s as opposed to 6s? ie by runnings 7s does it actually make any sort of performance difference?

yeh but it thought itd be worth a try

im gunah put 6s back in tonight i think (unless anyone can suggest otherwise) cos driving the car atm is rediculous

im running injector cleaner through this tank of fuel and see what that does. theres a fair bit of work involved with getting the injectors out so im not gunah rush into the flow-testing idea

adam,

If you don't have enough timing advance and don't run highish boost or revs then colder plugs will foul.

7's aren't all that cold, and with RB's the factory ecu like to run 14 AFR's at idle and low throttle so they should stay sort of clean.

My 7's are only a little fouled at the moment thanks to me driving around with a blown ic hose, other than that they are fine.

Im thinking of running 7's aswell, considering i've powered up my SR20DET by ~60% over stock. Surely I should go one colder? Cos i read everywhere that ever 75-100hp increase u go 1 range colder. I might just go buy 1 colder copper plug (Heat/R 7) see how it goes. So if it fouls up, at least the car will hopefully still be fine.. Maybe thats an idea for everyone! =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If your current chain of thought is, I'll go somewhere like pick and payless (or equivalent) and causally remove the bit of roof with your BYO grinder then casually weld that into your car... oof. It might sound easy but you will 100% end up with a warped roof. You say you'd prefer some ugly fab work, but I don't know if your prepared for how ugly this will be lol.  I've seen professional welders do similar but easier repairs and still end up with warped panels.  It is reasonable to assume that from your current skill level, you won't be able to do this cut and paste job while keeping flat panels.  Ok, but we are here to learn. This might be the go... jump on car sales, sort by price, buy the cheapest thing with rego and drive it home. This is your new practice vehicle. If you're thinking of doing the cut and paste job, try it on this car. Cut out the panel (hey it's a perfect fit) weld in the panel. See what you think of the results.  Next thing you could try, practice removing the entire roof in one piece by drilling out all the spot welds etc. Have a crack and welding the roof back on.   
    • I've never welded but I own a welder and I've always wanted to learn. In fact I had already looked at a 1 day welding course in Sydney.  I'd prefer some ugly metal fab than anything weak.  I'm challenging myself a lot with this car. For so many years I've just paid other people to do things and I've always been keen to learn and get better.
    • Ok, thats a good starting point.  So before we start.... do you mind if the car say isn't a strong as it was before? My first thought is go excavating for rust. You'll be left with a gaping hole, that will be filled with fiberglass. You could make it look factory pretty easily but yeah, if you never crash it will never be an issue right? Before we look at other options, how confident are you welding? 
    • Oh this is my 1998 E39 5 series. It's worth more to me than financial value. It's a project car for me to love and work on without fear of f**king up something that has lots of value or that I need to keep running.
    • I'm super realistic here. I love the car and want to keep it but I know it's days of perfect condition are well and truly over. I just want a fix that won't come back. 
×
×
  • Create New...