Jump to content
SAU Community

Recommended Posts

ok guys its my moment of truth! REGENCY tomorrow morning!! everything i know of is out and ready so fingers crossed!! theres a few questions i need to answer.. 1- how long is an average inspection? 2- do they check under the dash? 3- wats the deal with exhaust smoke (as mine is blowing a little black due to no tune and sitting around for 6months)? 4- and i dunno about the db of my exhaust....

anyways this is my first trip any tips???

cheers guys if she comes good i will cruise with u guys soon and introduce myself!!!

Edited by rad33
Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/
Share on other sites

yes they probably will check everywhere and anywhere, including pilling off the ecu kick plate to see if its aftermarket.

Dont expect to come through first time and u will be ok. U will be suprised what they are most likely to pick on. Inspection tends to take as long as they feel like being picky.

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3077390
Share on other sites

yes they probably will check everywhere and anywhere, including pilling off the ecu kick plate to see if its aftermarket.

Dont expect to come through first time and u will be ok. U will be suprised what they are most likely to pick on. Inspection tends to take as long as they feel like being picky.

sounds hard

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3077616
Share on other sites

They generally don't check for aftermarket ecu's unless its been defected for it or something doesn't look right. i.e different injectors, afm etc.

Regarding turbo timers etc.. Just make sure its disabled and if possible shove it right up behind the dash where it can't be seen or felt. Good luck getting it back out though as there's next to no room up behind the dash's of these cars. :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3078341
Share on other sites

ok heres the verdict.....

FAILED lol..

as i expected, but all wasnt bad!! the inspector was a champ! we like talked about new mods and upgrades and wats a good turbo and stuff! he also showed me and gave me tips on getting it back on the road!

ne ways heres the list

-eye level rear brake light

-fuel regulator to be removed (didnt know i had one lol)

-boost controller solenoid to be removed

-rear centre seat belt to be fitted as compliance plate says 5 seater

-oil leak NEAR turbo to be cleaned

-both rack boots broken to be replaced

-RH rear steer inner rack end has play

-fix play at left front wheel bearing

-fix play at left front upper arm

-rh front upper arm bushes have play

-side indicator globes worn, need to be amber

now all i need is help on parts to fix, were i can get them, whos best to do it and $$$$$

oh he didnt even check to sound on my exhaust and he passed my gtr cooler!!

and he never saw my timer!!

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3079998
Share on other sites

sounds like a front left wheel bearing, a couple of bushes and a lil bit of other stuff to do

for the rack boots etc try

Driveshaft & CV Centre

12 Deloraine Rd Edwardstown 5039

(08) 8374 2944

if ya south(ish), i can put ya onto a mobile mechanic who mite be able to do some of that work for ya

otherwise i reccomend

Rod Webb Auto Electrical

2 Muriel Ave Somerton Park 5044

(08) 8294 4599

and of course, Boostworx

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3080094
Share on other sites

ok heres the verdict.....

FAILED lol..

as i expected, but all wasnt bad!! the inspector was a champ! we like talked about new mods and upgrades and wats a good turbo and stuff! he also showed me and gave me tips on getting it back on the road!

ne ways heres the list

-eye level rear brake light

-fuel regulator to be removed (didnt know i had one lol)

-boost controller solenoid to be removed

-rear centre seat belt to be fitted as compliance plate says 5 seater

-oil leak NEAR turbo to be cleaned

-both rack boots broken to be replaced

-RH rear steer inner rack end has play

-fix play at left front wheel bearing

-fix play at left front upper arm

-rh front upper arm bushes have play

-side indicator globes worn, need to be amber

now all i need is help on parts to fix, were i can get them, whos best to do it and $$$$$

oh he didnt even check to sound on my exhaust and he passed my gtr cooler!!

and he never saw my timer!!

just make sure you fix those problems for the next inspection and you're bound to pass. Seems like the majority of the problems listed you can do yourself, if you're willing haha.

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3080575
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Been a long time since r31 got some love, my brother dropped a shitbox ls1 crapadore in my lap to fix up.  Put a wiper motor in as the flooded one was no longer alive.  got windscreen wipers now. Time to clean respray and install back in the titanic  IMG_0505.mov
    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • Thanks buddy. I thought it was a server storage thing. 🤣
×
×
  • Create New...