Jump to content
SAU Community

Recommended Posts

ok guys its my moment of truth! REGENCY tomorrow morning!! everything i know of is out and ready so fingers crossed!! theres a few questions i need to answer.. 1- how long is an average inspection? 2- do they check under the dash? 3- wats the deal with exhaust smoke (as mine is blowing a little black due to no tune and sitting around for 6months)? 4- and i dunno about the db of my exhaust....

anyways this is my first trip any tips???

cheers guys if she comes good i will cruise with u guys soon and introduce myself!!!

Edited by rad33
Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/
Share on other sites

yes they probably will check everywhere and anywhere, including pilling off the ecu kick plate to see if its aftermarket.

Dont expect to come through first time and u will be ok. U will be suprised what they are most likely to pick on. Inspection tends to take as long as they feel like being picky.

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3077390
Share on other sites

yes they probably will check everywhere and anywhere, including pilling off the ecu kick plate to see if its aftermarket.

Dont expect to come through first time and u will be ok. U will be suprised what they are most likely to pick on. Inspection tends to take as long as they feel like being picky.

sounds hard

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3077616
Share on other sites

They generally don't check for aftermarket ecu's unless its been defected for it or something doesn't look right. i.e different injectors, afm etc.

Regarding turbo timers etc.. Just make sure its disabled and if possible shove it right up behind the dash where it can't be seen or felt. Good luck getting it back out though as there's next to no room up behind the dash's of these cars. :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3078341
Share on other sites

ok heres the verdict.....

FAILED lol..

as i expected, but all wasnt bad!! the inspector was a champ! we like talked about new mods and upgrades and wats a good turbo and stuff! he also showed me and gave me tips on getting it back on the road!

ne ways heres the list

-eye level rear brake light

-fuel regulator to be removed (didnt know i had one lol)

-boost controller solenoid to be removed

-rear centre seat belt to be fitted as compliance plate says 5 seater

-oil leak NEAR turbo to be cleaned

-both rack boots broken to be replaced

-RH rear steer inner rack end has play

-fix play at left front wheel bearing

-fix play at left front upper arm

-rh front upper arm bushes have play

-side indicator globes worn, need to be amber

now all i need is help on parts to fix, were i can get them, whos best to do it and $$$$$

oh he didnt even check to sound on my exhaust and he passed my gtr cooler!!

and he never saw my timer!!

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3079998
Share on other sites

sounds like a front left wheel bearing, a couple of bushes and a lil bit of other stuff to do

for the rack boots etc try

Driveshaft & CV Centre

12 Deloraine Rd Edwardstown 5039

(08) 8374 2944

if ya south(ish), i can put ya onto a mobile mechanic who mite be able to do some of that work for ya

otherwise i reccomend

Rod Webb Auto Electrical

2 Muriel Ave Somerton Park 5044

(08) 8294 4599

and of course, Boostworx

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3080094
Share on other sites

ok heres the verdict.....

FAILED lol..

as i expected, but all wasnt bad!! the inspector was a champ! we like talked about new mods and upgrades and wats a good turbo and stuff! he also showed me and gave me tips on getting it back on the road!

ne ways heres the list

-eye level rear brake light

-fuel regulator to be removed (didnt know i had one lol)

-boost controller solenoid to be removed

-rear centre seat belt to be fitted as compliance plate says 5 seater

-oil leak NEAR turbo to be cleaned

-both rack boots broken to be replaced

-RH rear steer inner rack end has play

-fix play at left front wheel bearing

-fix play at left front upper arm

-rh front upper arm bushes have play

-side indicator globes worn, need to be amber

now all i need is help on parts to fix, were i can get them, whos best to do it and $$$$$

oh he didnt even check to sound on my exhaust and he passed my gtr cooler!!

and he never saw my timer!!

just make sure you fix those problems for the next inspection and you're bound to pass. Seems like the majority of the problems listed you can do yourself, if you're willing haha.

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3080575
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...