Jump to content
SAU Community

Recommended Posts

:yes: Hi my brother has a problem with his R32 GTR 89 model...

This is his message...:

The problem is when I start it revs up to 1200 rpm then drops to 1000 rpm, after warmed up sometimes it will fall too zero and pop up again to 1000 then engine dies.

Also as i'm driving along doing 60k or under I try to accelerate but it wont let me and start dereving by it self... I try to put it a lower gear eg. second but it will only rev up to 3000rpm and start cutting out. So I basically have to pull over and turn off the car and then restart the car and sometimes it works.

I have changed, oil, spark plugs, checked coil packs, just changes fuel pump to Walbro gss341 but still not working correctly by not letting me rev.

If anyone has had this problem or can give some advice on where to look it will be most appreciated.

Thank You

:)

This is his message...:

Sooo mysterious :)

Maybe idle control valve, or AFM, and the not wanting to rev, sounds kinda "Nissan: sensor dropped out / stopped working, induce rev cut mode"

Has your brother checked for error codes from the ECU?

Cheers

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...