Jump to content
SAU Community

Recommended Posts

  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

mine cost me $400 plus the $300 worth of 600HP fuel pump (cost me $200 actually).

NOS and others do kits for around $1500 for a (wet). Leave the dry kits well alone. 100HP shot on top of a stock turbo R33. The install is easy the only special tool you will need is a tap and die kit ($20 from hardware store) but, often the kit comes with the suitable tap anyway.

Nitrous is the best value mod bar none. You only need a fuel pump change. No ecu, intercooler blah blah blah...

Originally posted by rev210

mine cost me $400 plus the $300 worth of 600HP fuel pump (cost me $200 actually).

NOS and others do kits for around $1500 for a (wet). Leave the dry kits well alone. 100HP shot on top of a stock turbo R33. The install is easy the only special tool you will need is a tap and die kit ($20 from hardware store) but, often the kit comes with the suitable tap anyway.

Nitrous is the best value mod bar none. You only need a fuel pump change. No ecu, intercooler blah blah blah...

Im pretty sure Dry is better than Wet (or maybe its the other way around)

for $1500 u can get a Pro Fogger NOS System 500hp+

why just go 4 100 when u can go 4 500 ;) (bigger is always better)

Guest INASNT
Originally posted by Soulja

Im pretty sure Dry is better than Wet (or maybe its the other way around)

for $1500 u can get a Pro Fogger NOS System 500hp+

why just go 4 100 when u can go 4 500 ;) (bigger is always better)

coz if he went 500 shot he would be walking to work coz his engine would blow itself to bits in a matter of seconds :)

Originally posted by Soulja

Im pretty sure Dry is better than Wet (or maybe its the other way around)

for $1500 u can get a Pro Fogger NOS System 500hp+

why just go 4 100 when u can go 4 500 ;) (bigger is always better)

Not when the motor will only handle 450-500hp. :)

So far my Nitrous install is pretty undetectable under bonnet. You can't see the solenoids and the braided lines are covered with good old pollution hose. As they say 'nothing to see here'.

As for the bottle: 'that subwoofer box is rather interesting.....'

I think I would go for the dummy setup my self.

I'd rather have a few bones laying around so if I were to get pulled over they would run off with the bones happily.

Then you could make it look really nice under the bonnet and be confident that all is 'legal'

Why wouldn't they?

If you use it for the drags... Get a slip handy in the glovebox presto.. A lot riskier with it hidden.

I havn't been pulled over for some time but when I do they know what they are looking for. There not that 'dumb' well the ones i've run in to arn't.

Well Rev, I have been trying to resist commenting, but I just can't. You sold out!!!! What happened to the standard turbo for 12's guy? I'm laughing and it's not from sniffing NOS. Your gunna add some nitrogen and oxygen from the dentist to make the car go faster for phissssst, that long. Do it three times and you can't do it anymore, 'till you go back to the dentist for a refill of the baby's bottle.

Shoot why don't you just take the turbo off and the intercooler and just run some more NOS? Then you could claim 11's without any turbo at all, let alone a standard one. Crikey why not sell the RB25DET and buy a RB25DE? Just add some more giggle juice, it'll be faster.

OHH! I've got a great idea, why don't you take the engine out completely and just squirt some laughing gas into the exhaust pipe and light it? Jet car man, did a 10 with no efn engine at all.

Sorry, I can hardly control myself with the laughing, I'm either gunna break a rib or pee myself. Gotta stop now.............

I don't count on dumb cops. Thats why my setup is so well hidden.

Been around cars with hidden nitrous for some time. The best strategy with a 'sleeper' is to not draw any attention to yourself in the first place (that suits the law fine because you are also unlikely to be doing illegal things on the public roads). Having a 'fake' nitrous kit is like a red flag to a bull. It may not actually work (the cops are unlikely to test this) but, you will cop a sticker for something else in the best case senario.

sydneykid,

I'm still going to get the 12 without the nitrous. But it was just too cheap to pass up. And nitrous is alot of fun. Nothing like the torque it brings instantly.C'mon for $400 would you say no?

BTW, did you know I've got a worked V8 powered volvo wagon as a family car? Complete with two baby seats and a pram. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...