Jump to content
SAU Community

Recommended Posts

Originally posted by DennisRB30

If you get rid of the PCV system your engine will build up harmfull acidic gases which contaminate the oil reducing engine life.

I just got rid of my PCV and vented it straight to the Atmosphere. Is this bad? or is it only bad when you block it of completely. I'm finding alot of oil and shite in the intake. Never really known about the PCV, lol.

  • Replies 153
  • Created
  • Last Reply

Top Posters In This Topic

You can remove the PCV valve(illegal) or block it so it looks operational, but you must have a catch can to filter out the blowby gas/oil otherwise it will get sucked up into the intake/turbo/intercooler/engine.

INASNT have you blocked off the PCV valve or not?

VPW mailorder, there in epping but deliver to your door and yes they come with brackets but there kinda crappy so im making better ones also i had to go buy some hose and some fittings but that cost me like $20, and the catch can was $90 soooo its all good alot cheap than the cusco ones

i've installed my cusco oil catch can good 9-10months ago, but i am yet to fill 1/2 of the can with oil ... is this normal? everything is connected correct got it checked by my mechanic when i was servicing my car last saturday... i've heard some stories like someone losing more than 1litre of engine oil on the track and stuff... i've been to 3 track days with the catch can installed and i didn't lose that rediculous amount of oil... is anything wrong here?

nissaner, theoretical part 2: Your catch can is stuffed and doesnt work:) j/k

If you take off the oil fill cap when at idle, you will soon know if you are getting much blow by - on cars with poor (compression) rings, you will notice air escaping at a fair rate - thats if the pcv valve isnt blocked:p

Guest INASNT
Originally posted by turbomad

You can remove the PCV valve(illegal) or block it so it looks operational, but you must have a catch can to filter out the blowby gas/oil otherwise it will get sucked up into the intake/turbo/intercooler/engine.

INASNT have you blocked off the PCV valve or not?

nope, it feeds back after the the catch can

About catch cans. I bought an AVO unit 'bout a year ago. It has two inlets on the top and one outlet on the side. I use it on my RB20.

I have blocked off one of the inlets, connecting the catch-can only to the exhaust-side cover. The exhaust-side cover is connected to the intake-side cover as normal, which is the connected the inlet plenum as normal.

The catch-can outlet is connected to the pipe between the AFM and turbo as normal.

I still find that I have heaps of oil in my intake pipes. I also noticed that there is never a real build up of oil in the catch can (should there be?).

Am I expecting to much (thinking this should leave no oil in my intake)? Should I connect it up differently? I'm asking coz I feel like I've wasted my money - but you guys rekon catch-cans are ok.

if you've still got the breathers connected to the plenum, then the catch can probably won't do much. You've given the air two paths to take, and going straight into the plenum is much easier than going through the filter in the catch can. So there probably isn't much air going into the catch can, thus the lack of oil. I think if you block off the line going into the plenum things may improve. Also make sure that the catch can actually contains some filtering material. Some of them rely on the assumption that you'll have one of thos cute little k&n's attached to the outlet to do all the filtering. If this is the case with yours, then without the little filter all you are doing is running the blow-by through a can, which won't do much at all.

Thanks Belly_up,

Once again for the people in the cheap seats - you reckon I should block off the line between the plenum and the intake-side rocker cover (I'd remove the valve and replace it with a brass plug).

I should then run one line from each of the rocker covers to the two inlets on the top of the catch can. I should then assess whether the can has filter material in it, if it does, I can plumb back to the inlet piping, if it doesn't I should put a filter in it.

Does that sound like what you mean?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...