Jump to content
SAU Community

Recommended Posts

Alrighty

So I have a spare VP S2 3.8L V6 Commodore motor sitting down the back.

It has NO alt, NO PS, NO LOOM, NO ECU

It has been stripped and just "placed" back together (Needs a rebuild)

Has basically everything else with it

Also have everything that's required for a manual to auto conversion on a V6 (Torque convertor, bell housing, interior parts, shifter, tail shaft)

This all came out of my old VR V6 Acclaim.

Gearbox has dropped something. It still drove, but much more then 1/4 drive and it went majorly slipping through 1st and 2nd (no drive at all) Even a couple of times in 3rd if I went to overtake on the freeway, was quite dangerous. So needs a rebuild.

I have my two old rear tyres (no rim) One is on tread wears, the other has about 2mm left to wear.

Suit a stock VR Commo rim. (205/50/15 I think, or 225/50/15 I think, not positive)

I also have my cannon that came with my R33 for sale. It's in good working order, needs a polish.

Reason for removal: Needed to get the car a touch quiter (Was only JUST legally over because of the rest of my exhaust system)

3" in, 3" out from memory

So, engine: $100 (Make an offer)

Gearbox: $100 (make an offer)

Rest of the auto gear: $100 (Make an offer)

Tyres: Buy something and if you want em you can have em.

Cannon: $250 (make an offer)

Okay, SMS me on 0406 962 347 or PM me on here.

The first 3 items I'm quite negotiable on, basically throw me an offer and you'll prob be able to come pick it up. Prices are up basically for the rules sake... LOL.

Quite urgently want them gone (They've just been sitting since they got pulled out, want em gone now, I need that side of the garage clear)

I'm located in Wollongong NSW

I know it's a skyline forum, but I sold my commo for my R33, now I need to clear the old spare parts out (It's only taken 12months... :blink:)

Am off to post on the Commo sites now.

Link to comment
https://www.sau.com.au/forums/topic/167453-mainly-commo-parts-one-skyline-part/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...