Jump to content
SAU Community

Fuel Freedom International

mle808
 Share

Recommended Posts

mle808 Enthusiast

mle808

Posted
Posted (edited)

Hey guys,

I was given this website by someone I know who has just purchased one of their products(tables for fuel tanks). Fuel freedom international claims to have a product which increases power AND economy in both petrol and diesel engines via a capsule added to every tank refill.

After looking at the demo vid their product seems like a capsule which is added to every tank of fuel and works as a catalyst to combust the fuel more efficently inside the chamber.

The demo vid is on the front page. Check it out.

They also go on to say that..temperatures in the exhuast manifold will decline as combustion will be greater inside the combustion chamber and reduce combustions as the mixtures are exiting to exhuast manifold

Is that possible? If temperatures decrease like they say...wouldn't that mean less detonation/pinging?

Anyways, here is the link.

So yea, check out that vid and a quick read if your interested enough.

I want to know how this works...they obviously won't tell us exactly how.

After watching that vid, i was interested in how else can we mimic the exact same perfect combustion proccess? ecu tuning? ign?

What i mean is, when we get our computers/ engines tuned...are we basically aiming for the same thing?

I thought we try to increase the duration of the igniting process to get more power... but then...i don't have much knownledge of the technicals of this.

maybe you guys can elaborate.

Will this product be more useful on a normal passenger viehcle? Will it be bad on a sports engine? Or do you think is just another scam?

Discuss away...

And no...I'm not trying to scam anyone...

I think when you purchase the product or register online your given a link with your username..must be some sort of rewards program. So be sure to use that link if your going to register.

Edited by mle808
Link to comment
https://www.sau.com.au/forums/topic/168683-fuel-freedom-international/
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...