Jump to content
SAU Community

Recommended Posts

chasing $700.

This cooler is a good cooler at a good price.

core measures 600x300x76 and it has been professionally made.

End tanks are arranged as to suit the pipe arrangment with the most efficient piping route requiring only 1 hole be cut which is easy.

In and Out are on OPPOSITE sides and are 2 1/2 inch (suit skyline)

It uses a K&J Performance core which has PROVEN results.

My friend had it made up for him before he ran onto other financial difficulties. So i bought it of him for $700 to go on my ET Turbo project.

I now realize how hard it is to pipe this thing up to an ET (Long piping with lots of bends)

So therefor i want my money back.

Come on people. this is a very good cooler at a very good price.

IT DOES NOT INCLUDE PIPING.

This size is perfect for RB20DET Or RB25DET, and is the size most people opt for when going for good street power on a 2-2.5 ltr motor.

K&J cores are used by all the big intercooler fabricaters... and there are alot of people out there who love and swear by them (including myself). The same cooler form one of the big workshops would cost you well above this price!

The cooler is in BRISBANE and i can be contact any time on 0410 133 391.

A pic can be found at http://www.geocities.com/nismo_et_turbo/Img_0029.jpg

however this does not show the thickness of the cooler. (it is a nice thick cooler)

Intercooler is debatably one of the first serious upgrades you will do to your motor if your chasing DESCENT power.

WHEN YOU GET TO THE SITE IT WILL COME UP WITH PAGE NOT THERE.

CLICK INTO THE ADDRESS BAR (where http:// is written) SO THAT YOU CURSOR IS THERE AND PRESS ENTER. PIC SHOULD WORK THEN.. IT IS A GEOCITIES F**K UP.

Sorry mate. Price is firm. i have all the piping here to pipe it up to the pulsar as bought it all (cost an arm and a leg as its alloy mnrel bends). So i only need to get my mate to weld it up.. but i would really like to avoid such a long cooler tract.

But if it means i have to i will.. not prepared to loose money.

Got to go ppl.

CMON.. SOMEONE MUST WANT THIS COOLER - I HAVE ONE GENUINE INTERESTED... BUT HAS SINCE NOT GOT BACK TO ME CAUSE WAS ASKING HIS MATE.

PM ME WITH OFFERS IF YOU HAVE THEM (nothing stupid).. ALTHOGUH I AM NOT WILLING TO SWAY ON PRICE MUCH.

AND THE COOLER IS NOT A KIT OR DOES NOT COME WITH PIPING... I AM SUPRISED HOW MANY HALFWITS HAVE PM'D ME SAYING.. ILL TAKE IT IFF ITS GOT PIPING HOSES AND CLAMPS WITH IT.

YEH AS IF!!!!! WOULD BE AROUND 1200-1300 IF IT CAME WITH KIT

piping, hoses and clamps woulc very depending on what material used.

for mild steel budget maybe $200 for alloy maybe $350. It all depends on your pipe route too. and also the silicon hoses you use. You can go for high grade clamps with high grade silicon hoses and it costs you, but just the generic stuff works well enuff. Also depends on your friends :)

so yeh maybe take what i say as a general guide.. aot of the time you can utilise some of your stock stuff in way of hoses and clamps, even the piping up to the throttle body can be retained.

someone please take it..

at this stage it looks like im jst going to have to stick with the HUGE inlet tract on the ET turbo combines with this cooler.

****.

i got a BB T03 going on her as well.. its going to be lag city.

  • 1 month later...

Piping... hm... i did mine in 3mm alloy... all mandrel bent one piece piping no cut and weld job... all polished... cost me total fitted $110 bucks ha ha ha ha ha ha helps when you have three mandrel benders and unlimited alloy at work to play with not to mention a full polishing bay :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...