Jump to content
SAU Community

Rb26 Head And Engine Parts

MR RB30
 Share

Recommended Posts

MR RB30 Rising Star

MR RB30

Posted
Posted (edited)

Hi everyone ive got few parts for sale out of my GTR R33 98 vspec II with 56KM'S on odometer. Selling due to upgrading engine to handle 600KW

RB26 head without turbos and inlet manifold $1300 ONO excellent condition was on running engine can guarentee

crank $500

rods $300

coilpacksx6 $50 each

ignitor pack $100

engine sump/diff complete $400

fuel rail $100

fuel regulator $50

intercooler $450

oil pump $100

PS: Car has not seen more than 10psi running standard turbos

Can be contact via SMS mobile or PM 0430-176-077

Edited by MR RB30
Link to comment
https://www.sau.com.au/forums/topic/169794-rb26-head-and-engine-parts/
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
Young GT-R Proficient

Young GT-R

Posted
Posted

head still available? what does it come with from this list:

covers, coil packs, cas, cams and cam gears, turbo lines, exh manifolds, loom, ecu.........

very keen for a head with plenum complete but am interested ....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...