Jump to content
SAU Community

Recommended Posts

Hey guys...i need some help on this one, ive got a kenwood flip face deck

my head unit is powered and all the speakers work but the problem with it is that it seems to be keylocked....like the whole lcd display is lit up, i mean literally, all the displays are lit up but not to full contrast (like there is something wrong with it). It doesnt allow you to press any buttons at all except the reset button but that even doesnt get the deck to normal working conditions.

I went to the the audio repair shop and he qouted $120 to fix it and said that there is something wrong with the BAND?? is this for real??

any help would be appreciated, thanks

Link to comment
https://www.sau.com.au/forums/topic/17008-kenwood-headunit-problem/
Share on other sites

A lot of flip down units use a "flex" (thin plastic strip with wire traces through it and bare terminals on ends) to connect the face to the main unit. Wondering if this is what the repairer meant by a "band"??

Some of these flexes are prone to breaking after being bent back and forth many times. Could be the ground wire for the buttons inside this that's broken?

I can imagine Kenwood would charge $70-$80 for this part, spares are usually extremely overpriced considering it would be a $0.02 part... Factor in labour and that price would sound about right.

If you've got any friends with some electronic nous and a multimeter you may be able to check the continuity of these wires and see if one is broken. A short length of $0.20 wire and some soldering may be able to fix it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...