Jump to content
SAU Community

Recommended Posts

hey guys im having afew problems with my car lately, but this is the major one, lately my car has been playing up, car drives fine ( as normal ), so when im on second gear, as i boost it my car just putters ( from the exaust ) and havent even gone past the readline? its the sound like if your cross the redline it putters? but mine comes real early when boosting?

cheers

Link to comment
https://www.sau.com.au/forums/topic/170179-problem-when-boosting/
Share on other sites

hey guys im having afew problems with my car lately, but this is the major one, lately my car has been playing up, car drives fine ( as normal ), so when im on second gear, as i boost it my car just putters ( from the exaust ) and havent even gone past the readline? its the sound like if your cross the redline it putters? but mine comes real early when boosting?

cheers

If its a popping noise, and assuming its around 4500 - 5000k, your engine is missfiring.

What u need to do is replace your sparks plugs, but get them gapped down from 1.1mm standard, to 0.8mm (this just makes the spark stronger as is doesn't have to travel as far). Also, if you still have the problem, you will need to look at replacing your coil packs. Splitfire is the way to go, check out Slide Performance.

mines doing the same thing - but i already have splitfires and just put new plugs in.......im getting new plugs ordered and going from there, im hoping its not my crank angle sensor (not exactly sure on symptons when that decides to play up)

ive gota go to NGK in adelaide to specially order my spark plugs.......noone here stocks them (sucks having to buy proper race plugs) gonna be an expensive exercise, but if it fixes the problem....360rwkw of fury will be back

what mods you got?

quite a few LOL...........apexi RX6 turbo kit with 50mm ext gate, RB27DET...bottom end consists of R34GTR N1(nismo) crank, conrods and over sized pistons (had a look at this kit from Nismo and its crazy pricing) greddy plenum, 800cc injectors, splitfire coilpacks, dead spark plugs i hope, HKS step 2 cam gears, HKS and Tomei adj cam pulleys, its got the works........LOL

This is just a rough list, theres more internal work and other mods

Edited by Nathan_G1
quite a few LOL...........apexi RX6 turbo kit with 50mm ext gate, RB27DET...bottom end consists of R34GTR N1(nismo) crank, conrods and over sized pistons (had a look at this kit from Nismo and its crazy pricing) greddy plenum, 800cc injectors, splitfire coilpacks, dead spark plugs i hope, HKS step 2 cam gears, HKS and Tomei adj cam pulleys, its got the works........LOL

This is just a rough list, theres more internal work and other mods

nice, sound slike a car i wouldnt mess with (for now hehe ) yeah ive ordered my set of splitfire,cam gears, and 550cc injectors, but wont install it till i get a bigger turbo ( still deciding on how much power i want), right after i solve this problem first lol

Edited by komokefe

yeh my problems only recently come into effect, im pretty sure everything is good.........i mean ive driven it before and it ran perfect, then started to miss (which was infact vacc line cut from wastegate to plenum), so i though it was plugs (old plugs were gone anyway), i replaced the plugs and nothings gone right since, so all im doing is getting a new battery and the specific spark plugs i need and i should hopefully be away......i have a lot of drift practice to get too.

if i could recommend you a turbo kit and you werent shy on spending some cash......find yourself an apexi RX6 - for an RB25 these turbo's are amazing dude, minimal lag and so much power to play with

yeh my problems only recently come into effect, im pretty sure everything is good.........i mean ive driven it before and it ran perfect, then started to miss (which was infact vacc line cut from wastegate to plenum), so i though it was plugs (old plugs were gone anyway), i replaced the plugs and nothings gone right since, so all im doing is getting a new battery and the specific spark plugs i need and i should hopefully be away......i have a lot of drift practice to get too.

if i could recommend you a turbo kit and you werent shy on spending some cash......find yourself an apexi RX6 - for an RB25 these turbo's are amazing dude, minimal lag and so much power to play with

yeah might go for a RX6, not to fussed which brand!! ive had alot of problems with my car for the last recent years! its a head ache ill tell you, even my missus broke up with me coz she thought i was nuts over my recent problems with the car lol but she came back hehe,

anyways found my problem, i found a little hole in my I/C piping and i think theres another which is showing a sign of being a hole lol, can these be welded or just relpace it? ( prize wise )?

but ill still get new spark plugs thou

cheers

exhaust leak will decrease power i think........should definately fix that problem, hole in the I/C piping, shit.....nice find mate, check over it all for any more.

new plugs fixed my car runs crazy again, cost me $75 each spark plug.........retail they were $110, THANKS FOR HELP NGK.

yeah love ngk plugs aye, getting some tommorw hopefully that solves the hisatation wheen boosting, coz after getting the holes welded in it didnt solve the problem, so might check to see if its the plugs....... and plus had the mechanics check my exaust and there were no sign of leaks, BUT he said my car could be running rich coz my wastegate pipe have been leaving black mark on my exaust? lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...