Jump to content
SAU Community

Recommended Posts

iv got an r33 with rb25t, 221kw at wheels. iv bought a oil catch can/tank believing it would make my car run more efficiant and give me better performance... it has an inlet and outlet of 6mm and holds approximatly 400ml.

Can anyone tell me if iv wasted my money or are they worth putting in? also is it big enough??? and what do you think of them?

cheers

Link to comment
https://www.sau.com.au/forums/topic/171137-oil-catch-canstanks/
Share on other sites

6mm is pretty small, you dont want to restrict the breathing system, its designed for stockish power levels which you arent at. you could of course still use it, but i would think about getting some bigger nipples on it

EDIT: are you sure they are only 6 mm? you want something at least as big as the hoses on the rocker covers ideally

Edited by jeffworld2

The part is titled well - the purpose it to catch oil from the engine. Usually not a problem unless you are on the track. Won't improve your performance but will keep you engine bay cleaner. Not a waste of money if you ever plan to take you car on a track.

6mm is pretty small, you dont want to restrict the breathing system, its designed for stockish power levels which you arent at. you could of course still use it, but i would think about getting some bigger nipples on it

for what sort of power im pushing out 221kw what is the recommended size i should use? is the 400ml compacity big enough?

6mm is pretty small, you dont want to restrict the breathing system, its designed for stockish power levels which you arent at. you could of course still use it, but i would think about getting some bigger nipples on it

EDIT: are you sure they are only 6 mm? you want something at least as big as the hoses on the rocker covers ideally

yes it is 6mm i bought it not knowing what size inlet/outlet it had. silly i know

best is 500 to 1l with 15mm ports, plus it does help any engine that sees high revs every now again it doesnt just have to be track specific, that way you can see if it is breathing heavily or not. Plus this might get closed with "Been covered many times please use the search function" which is true but there ya go theres a start

Cheers]

A

best is 500 to 1l with 15mm ports, plus it does help any engine that sees high revs every now again it doesnt just have to be track specific, that way you can see if it is breathing heavily or not. Plus this might get closed with "Been covered many times please use the search function" which is true but there ya go theres a start

Cheers]

A

new to this.

i will keep that in mind... thanks

just dont make anything smaller than it already is. have a look at the gtr breather hoses and see they are a lot bigger than the gtst from factory.

you dont need to change whats on your rocker covers, but try and keep the same or larger diameter through your catch can too. 400ml is not a lot, but your car probably wont spit a whole lot out so that should be fine. the catch can is there to stop the oil that is in the air in the cam covers from going into the intake, where it will go through to the cylinders and be burnt along with the air and petrol. oil in the intake can rob power if excessive, but more importantly can promote detonation, pinging, knocking etc its all the same to you it equals bad news. so you use a catch can to try and seperate the oil from the air (fill it with steel wool in a stocking etc. if you can open it). If it has a small filter venting to atmosphere, then it is a defect in nsw and will coat everything around it with a fine mist of oil unless you use it as an oil-air seperator (the steel wool idea).

if you use a smaller inlet/outlet pipe to the catch can than you have on the cam covers, at your power level you are risking increasing the crankcase pressure unnecessarily, which leads to dipsticks blowing out and cam cover gasket failure and a host of other problems if left unchecked.

keep everything sensibly sized and you will not have any problems.

Edited by jeffworld2

just had a good read, that is an awesome thread. i feel sorry for the noobs at the end tho lol. mine is fully plumb back, so nice and legal (i hope)

i like the size of the inlets on the drift ones. thats what you really want, if only there was 3

newer drift ones I believe have three or at least two plus a plug you can use to vent to atmosphere or as a third fitting they are still small an sucky

best bet is to get one welded up or do yourself if u have the gear,n the skill got one welded up as I dont have a welder was cheapish and big so actually legal for drags etc.

will try n post pics when I get a chance was worth the stuff around I reckon

atmo FTW

Edited by noone
newer drift ones I believe have three or at least two plus a plug you can use to vent to atmosphere or as a third fitting they are still small an sucky

best bet is to get one welded up or do yourself if u have the gear,n the skill got one welded up as I dont have a welder was cheapish and big so actually legal for drags etc.

will try n post pics when I get a chance was worth the stuff around I reckon

atmo FTW

excellent guys. you've been a great help. thanks

mine is "custom", about half the size of the stock windscreen wiper fluid dooby , its not pretty though lol. i will always plumb it back in, as that is just the law. i have a quick car but there is nothing i can really get done for. and i will try and keep it that way

mine is "custom", about half the size of the stock windscreen wiper fluid dooby , its not pretty though lol. i will always plumb it back in, as that is just the law. i have a quick car but there is nothing i can really get done for. and i will try and keep it that way

i dunno what to do with the 1 i have then lol...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...