Jump to content
SAU Community

Recommended Posts

does your current afm have a pink sticker on it or is it an orange one?

have a look at this thread...helped me alot. it has pics in latter pages of a dodgy and good z32 and is good to identify a z32 in general.

http://www.skylinesaustralia.com/forums/in...t=0&start=0

does your car have aftermarket ecu such as powerfc as stock 33 ecu cant run a z32

does your current afm have a pink sticker on it or is it an orange one?

have a look at this thread...helped me alot. it has pics in latter pages of a dodgy and good z32 and is good to identify a z32 in general.

http://www.skylinesaustralia.com/forums/in...t=0&start=0

does your car have aftermarket ecu such as powerfc as stock 33 ecu cant run a z32

yeah power fc... the sticker is green... there are some part no's but still not sure trying to check part nos???

i get lost with part numbers as well but as lineskee 33 said series 1 afm stickers are green so this gives it away but under your profile info it says your car is series 2 33 so kinda contradicts and gets me lost lol

i get lost with part numbers as well but as lineskee 33 said series 1 afm stickers are green so this gives it away but under your profile info it says your car is series 2 33 so kinda contradicts and gets me lost lol

what a spinout... yeah thats strange cause it is definatly ser 2 96 r33. although the previous owner did some crazy things so i guess it doesnt supprise me too much. eg of JUST 1 of the things was bending the rod that goes to the actuator to get more boost(ouch)it has taken over a year to "demodd", fix and upgrade. im getting there now...

here is a even bigger spinout my mate came over to help me on this he rekons its a z32 so once again inspecting the sticker he rubbed his thumb to read and it slid off to reveal an orange one.Why the #@$%! would someone do this any ideas.?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...