Jump to content
SAU Community

Recommended Posts

Wot up bought a house and sheds to small need to get rid of a heap of my stuff here goes

2 Work Rims 18 by 9inch wide +20 offset 4 and 5 by 114.3 no centre caps bit of gutter rash

70% falken 235 45 tyres SOLD

4 momo rims 6 spoke 17 by 7.5 +35 offset 5 by 114.3 sold my van so dont need them any more

come with all centre caps $550 open to offers

6 r33 gtst s1 coilpacks all work fine no cracks etc SOLD

hicas motor from r33 gtst s1 $30

R33 castor rods stock excellent bushes SOLD

R33 gtst aircon condenser compressor and under bonnet pipework all excellent condition

all removed by me who is a fridge mechanic (not dodge) may even regass in sa $250

r33 s1 rear seat couple of tiny marks $80

rb25 stock exhaust manifold $50

2 standard r33 red mirrors work perfect $100

Right and left rear trims the ones with arm rests and the ones the rear seatbelt goes through

r33 s1 $30 each

r33 roof lining for sunroof model few marks $40

2 crossfire 15 inch subs 1000wrms amp and 2 1 farad capacitors $800

left and right r33 rear rotors plenty left $50

r33 handbrake shoes heaps of meat $50

r33 s1 airflow meter and plug $120

r33 s1 ecu $100

r33 s1 rear bar red $80

space saver wheel $40

r33 stock intercooler SOLD

rb25 stock injectors by 6 $80

left and right r33 gtst stock guards good condition red

with gt badges $150

pm if you want more pics

willng to post if the $ right

open to offers on most items please no time wasters

Cheers Andrew

post-31558-1180924808_thumb.jpg

post-31558-1180924825_thumb.jpg

post-31558-1180924854_thumb.jpg

post-31558-1180924888_thumb.jpg

post-31558-1180924906_thumb.jpg

post-31558-1180924942_thumb.jpg

post-31558-1180924960_thumb.jpg

post-31558-1180936514_thumb.jpg

post-31558-1180936534_thumb.jpg

post-31558-1180936553_thumb.jpg

post-31558-1180936573_thumb.jpg

post-31558-1180936594_thumb.jpg

post-31558-1180936622_thumb.jpg

post-31558-1180936643_thumb.jpg

post-31558-1180955398_thumb.jpg

post-31558-1180955425_thumb.jpg

post-31558-1180955446_thumb.jpg

post-31558-1180955476_thumb.jpg

post-31558-1181446226_thumb.jpg

post-31558-1181446243_thumb.jpg

Edited by holes
Link to comment
https://www.sau.com.au/forums/topic/171321-cleaning-out-my-shed-adelaide/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...