Jump to content
SAU Community

Recommended Posts

I saw Ford advertising traction control on their XR6s just recently and was wondering if anyone out there knows if it is available after market or if any one is running it on their rear wheel drive skylines( or any other rear wheel drive ) ????

Thanks Guys and Gals

Link to comment
https://www.sau.com.au/forums/topic/171418-aftermaket-traction-control/
Share on other sites

Racelogic in the UK make one of the best aftermarket systems available, if you're into sports car driving.

Not only is it adjustable like on the current Ferraris with their Mattinetto system, so you can decide how much slip it permits before cutting power, but it can also be used as an (anti-lag) launch control. It also has a spark cut module as well as the standard fuel cut, so quite possibly it can be used as an anti-lag system while on the move too.

Its not cheap, though.

Edited by scathing

putting it onto a car without it could be hard (and expensive), since you usually need speed senders on each wheel.

a few ecu's have a launch control (such as the msd ignition system) but all they do is have a 2 step rev limit. my mate has a msd in his stanza. he has the switch setup on the clutch pedal. when the clutch is in the rev limit is set to 6000rpm so he sits on the line and holds it flat to the floor and it will sit at 6000rpm, and as soon as he lets the clutch out it will rev to the rev limit (9000rpm).

it doesn't stop wheelspin at all. just means you can get off the line at optimum rpm.

If your just looking to add some grip. A after market limited slip and some wider wheels with sticky tyres should give you a similar effect. A 2-way limited slip can add traction under acceleration and braking. Are you looking to gain traction for drag racing, or for the road, or both?

Racelogic in the UK make one of the best aftermarket systems available, if you're into sports car driving.

Not only is it adjustable like on the current Ferraris with their Mattinetto system, so you can decide how much slip it permits before cutting power, but it can also be used as an (anti-lag) launch control. It also has a spark cut module as well as the standard fuel cut, so quite possibly it can be used as an anti-lag system while on the move too.

Its not cheap, though.

Funny thing... I have one of these (the Top of the range system) sitting in a draw at home... I need to get around to getting it installed.

They aren't cheap.

putting it onto a car without it could be hard (and expensive), since you usually need speed senders on each wheel.

a few ecu's have a launch control (such as the msd ignition system) but all they do is have a 2 step rev limit. my mate has a msd in his stanza. he has the switch setup on the clutch pedal. when the clutch is in the rev limit is set to 6000rpm so he sits on the line and holds it flat to the floor and it will sit at 6000rpm, and as soon as he lets the clutch out it will rev to the rev limit (9000rpm).

it doesn't stop wheelspin at all. just means you can get off the line at optimum rpm.

the Race logic unit uses the ABS wheel sensors on each wheel... If your car does not have this you can buy the sensors from Race Logic.

works by cutting the injector pulse to give the maximum power you can use without slip.

the one I got also has Launch control AND a flat shift feature.

the one I got also has Launch control AND a flat shift feature.

that's cool. so does it have a spark interrupter for the flat change feature? that is how the v8stupidcars ones work. they have a switch on the shifter that they press as they grab it so it cuts the spark as they pull the gear through so the is very little torque transmitted through the gearbox as they do it.

that's cool. so does it have a spark interrupter for the flat change feature? that is how the v8stupidcars ones work. they have a switch on the shifter that they press as they grab it so it cuts the spark as they pull the gear through so the is very little torque transmitted through the gearbox as they do it.

There is a switch i think you have to place below the clutch so when it is in it acts like a rev limiter... As I haven't installed it yet you may be able to preset the max revs when flat shifting but I am not sure.

The thing with Race logic is it cuts fuel and not the spark which they explain how it all works through their website.

Edited by shaolin
There is a switch i think you have to place below the clutch so when it is in it acts like a rev limiter... As I haven't installed it yet you may be able to preset the max revs when flat shifting but I am not sure.

The thing with Race logic is it cuts fuel and not the spark which they explain how it all works through their website.

the switch would be for the launch control. that is how my mates works. it has a contact switch that disconnect once the clutch is pushed in about halfway.

the flat change switch would have to be on the gear stick or steering wheel, since flat changing is done without the clutch. that is when you keep you foot flat to the floor and just pull it from 1 gear to the next. i used to do that on my motocross bike sometimes when racing.

the switch would be for the launch control. that is how my mates works. it has a contact switch that disconnect once the clutch is pushed in about halfway.

the flat change switch would have to be on the gear stick or steering wheel, since flat changing is done without the clutch. that is when you keep you foot flat to the floor and just pull it from 1 gear to the next. i used to do that on my motocross bike sometimes when racing.

Ahh k...

the flat change I am talking about is using the clutch but not taking your foot of the accelerator.

Was just curious is all ! Seeing the Ford have it now installed on the XR6s I was wondering if they out sourced the traction control unit or had it made in house by Ford themselves !

Was interested for mainly drag racing on the track.

And I also actually thought about using the ABS sensors for that specific purpose. I am a bit surprised the isnt a redily available aftermarket unit out there. One thats not a squillion dollars that is !

Was interested for mainly drag racing on the track.

Get the RaceLogic then.

It has proper launch control functionality (with anti-lag), and since you can dial in how much slip you want you can let the computer work out how much to let the wheels slip to keep your revs up in the meat of the torque, and on-boost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...