Jump to content
SAU Community

Recommended Posts

heyas, this problem has been around for about a month now, sometimes its there for days but then the power steering comes back on occasions. Ive checked the power steering/auto fluid and its fine, the fuses have been changed recently and the problem stopped for about a day but now its back. I saw a thread on this problem awhile ago but no one seemed to have solutions, mostly theorys. Anyone have any ideas what it could be, or where the best place to go get it checked out or fixed? thanks a lot

Gauth.

Link to comment
https://www.sau.com.au/forums/topic/17200-hicas/
Share on other sites

Sneeza, 180SX's and Silvia's have it too you know :rolleyes:

However it was an option which means theres also a helluva lot of 180's and Silvias out there without Hicas.

Steve as usual has generalised to the point of being incorrect. It shouldnt be removed from ALL cars asap, because for starters not all cars have it. There is nothing inherently wrong with 4WS systems its just some people dont like the feel of it, each to their own. Ive never driven my car without it so ive got no idea what its "meant" to feel like.

Unless you are having problems with your HICAS and youve got no issues with the cars handling, theres no reason at all to disable it. Besides HICAS lock kits are yellow sticker material.

R32's in particular seem to be having all the HICAS issues of late, but it might be something to do with age. Perhaps the 33's turn will be soon :)

Red17

Link to comment
https://www.sau.com.au/forums/topic/17200-hicas/#findComment-356182
Share on other sites

Hope i'm not hi-jacking here, but i think my HICAS is playing up.

It seems whenever i'm turning a corner and hit a bump, the backend kind of floats to a side. Its hard to explain, but it doesn't feel good at all! Almost loosing control type of feel.

I'm going to disconnect it this weekend,and if anyones interested, will let you know the results.

Link to comment
https://www.sau.com.au/forums/topic/17200-hicas/#findComment-361512
Share on other sites

Having experienced my GTR both with and without HICAS I definately prefer without.

The HICAS takes inputs from vehicle speed and steering wheel position to determine in what direction the rear wheels move and by how much.

Unlike the ATTESSA 4WD system, it doesn't take inputs from individual wheel speed nor from axial or lateral G forces.

When the car is being driven sedately or even moderately hard it does make cornering easier.

When on the limit such as track work, the HICAS system will not pick up that the rear end is sliding and will actually turn into the corner more.

I have found by locking out the HICAS that the car is more predictable when the rear has broken traction.

Each to their own I guess depending on what you plan to do with your car, however I have no plans to refit mine.

Link to comment
https://www.sau.com.au/forums/topic/17200-hicas/#findComment-361548
Share on other sites

Ok, so the HICAS is causing major probs in my car.

Should unplugging the major plug that goes down to the HICAS stop it from working?

Thats what i've done, and found the orange light on the dash lights up. But i still have the problem when i go over bumps, it throws the car out a bit.

So this means that it is either still working, or something mechanical has stuffed up inside the hicas.

Link to comment
https://www.sau.com.au/forums/topic/17200-hicas/#findComment-368293
Share on other sites

As i am only a recent R33 owner I no not too much about them.

From what i understand the HICAS indicator only lights up when there is a problem with the HICAS. Ie when the engine is not on.

Therefore it would also light up if you unplugged the 'major plug'.

Also the HICAS as i understand only alter +/- 1 Degree or part of.

Link to comment
https://www.sau.com.au/forums/topic/17200-hicas/#findComment-368427
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...