Jump to content
SAU Community

Recommended Posts

Hello everyone,

jus wondering.. im thinking of buying this HID kit from carmate (its cheap) and they say that it will for my R34.. ok thats good.. but will it melt the plastic cover of the headlamp? Is it gna be to hot for it or it wont affect it at all? I dont wanna end up buying something that i'll regret.

And also can any1 recommend what brand to get or where to get them in a better price?

One more thing.... which is better... 6000k, 8000k, 10000k or 12000k?

i saw an Audi and its purplish in color which one is that?

thanks in advance :D

Link to comment
https://www.sau.com.au/forums/topic/172568-hid-kits-for-r34/
Share on other sites

Xenon is stock in r34 .. its just changed for complience... if you can get the stock setup would be even better doubt it will melt anything halogen would more so than hID purple would be 12,000

Edited by DECIM8

as DECIM8 mentioned, R34 GTT headlights are made for Xenon. Beside this though, HID kits run on 35W instead of 55W or more, so you wont have any issues with heat, as they are not as hot as filament bulbs. If you can get your hands on the stock Xenons, this would be the best bet, as the R34 headlight optics are designed for the D2R Xenon bulbs not the H1 filament bulbs that they put in with compliance.

If its too much trouble to get the factory xenons put back, then you would want to stay away from colours higher than 6000K, as the higher you go the less bright it is and it gets too blue/purple and you will be a magnet for cops. The 6000K colour seems to be the most prefered for people as its a white light with a tinge of blue.

If you go lower in K, like 4100K-4500K, this is what the R34 originally has, and even the BMW, Audi, S2000 etc, and the light is pure white with no blue. The reason you see blue/purple at certain times on the Audi or BMW cars with factory Xenons is because of the projector lens. The light isnt purple/blue, but white (around 4100K-4300K). It only looks blue/purple on the edges of the projection of light, and so thats why when its far away and the edge of the beam passes your line of sight, it looks purple/blue, but when the car comes up close the light is white. You wont be able to get this effect with the R34 as it doesnt use projector lights, it uses reflectors. Also, not all projector lens give out that blue/purple look at the edge of the light projection.

cheers

If you plan on getting an HID kit, don't get anything higher than 6000k. In my opinion, don't get 6000k either. I've got them and they're way too blue. If I were to buy a kit again, I would definately get 4300k. Most people get 6000k, but I think it's too blue. What BATMBL said about the blue-ish light from the Audi's is correct. It all from the projectors.

MvR3408 -

Hey man, HID is a complete conversion kit for your lights... just a quick explanation

your exsisting halogen lights have a tungsten(?) fillament which converts electricity to high heat, causing the fillament to glow and emit light which is reflected off from your headlights onto the road, much like a household globe.

HID lighting is a completely different form of lighting, there is no fillament whatsoever, just the glass and highly compressed gas, much like a fluro light only a lot more compressed. this is why when you flick on HID's they take a few seconds to light up, because the gas molecules need a few seconds to vibrate and emit light...

in lames terms, your HID lights use little to no heat, because there is no heat being used... only gas!

...I think that's how HID's work anyway... seems to be like that on my cefiro! I have 6000K and i have projectors and i get full sunshine light spectrum...

I love it, if you go HID you will NEVER EVER look back, it's so amazing coming from a cefiro where the lights are so dull to being able to see the reflectors of signs light up at about a kilometre away...

I got mine fitted and supplied by J-shop in Perth, $220 for the kit $80 for fitment and aiming of lights, the $80 included a one year warranty on them

you can buy a set off them for $220... www.jshop.com.au

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...