Jump to content
SAU Community

How Interchangeable Are R32 Gts And Gtr Parts?

nissan_gtr35

By nissan_gtr35,
in General Maintenance

 Share

Recommended Posts

nissan_gtr35 Collaborator

nissan_gtr35

Posted
Posted

Hi All,

This may have been covered to death previously and if there is another thread please feel to direct me to it if this is true!

I’m looking to get an idea from all the knowledgeable people out there as to how many parts such as panels and mechanical bits are interchangeable from R32 GTS-t's and GTR's? This has become apparent as I just had to replace a driver’s window in my GTS-t after an attempted theft, and I got it replaced with a GTR window. Are front guards a straight swap (my first guess says no seen as a GTR bar needs to be modified to fit a GTS-t!!!)? What has everyone else noticed?

Cheers

Laine

predator Grand Master

predator

Posted
Posted

Many parts are :thumbsup:

off top of head coilpacks, brakes, complete front end panels (these generally require all the supporting parts though.. like GTR indicators for GTR guards, etc), aircon & climate control, stock rims, fuel pump, dash, seats, pretty much most of the interior, starter motor, windscreen, taillights.. That's probably about it actually.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...