Jump to content
SAU Community

Gearbox Issues

CeJay

By CeJay,
in Australian Capital Territory

 Share

Recommended Posts

CeJay Grand Master

CeJay

Posted
Posted

Just appear to have lost reverse in my car, does anyone know of a good reliable shop to take it to? The gbox has an aftermarket gearset in it, so would want to take it somewhere that knows there way around them. Alternatively if anyone has any advice etc on what it might be that'd be good to. Car just doesn't select reverse anymore. Every other gear is fine, 5th does crunch on quick changes but that's about it.

Link to comment
https://www.sau.com.au/forums/topic/173105-gearbox-issues/
Share on other sites
NAman Collaborator

NAman

Posted
Posted

I have had this problem before...

There is a spring and plate in the gearbox which stops you selecting/going 5th to Reverse and what has probably happened is: this spring has broke and the plate has dropped into place and your are unable to select Reverse.

So get a new spring and replace it your self or to a workshop

The gearbox can be a bit of shite to get out (on a GTR anyway).

See the attached post

http://www.skylinesaustralia.com/forums/in...p;#entry2163684

I had ed at intraga automotive replace it while getting a service

Link to comment
https://www.sau.com.au/forums/topic/173105-gearbox-issues/#findComment-3183627
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      First time we have seen lights 
    • Wazmond
      WGNC34 - floor mats

      By Wazmond · Posted

      I think Fitmit had some, have a look on there (theyre Australian as well)
    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...