Jump to content
SAU Community

Recommended Posts

located in liverpool nsw.

R33-t rear discs, in VGC. will sell machined so as new cond.

$110 the pair

R32-t front discs, in VGC just a lil dirty, 30mm ish meat so its still long life.

$120 the pair

R32 front JURAN adjsutable strut brace

$100

AE86 oz spec front brakes (discs need replacements on left side)

$50.

S13 castor rods abit soft on one of them but doesnt affect at all

$180/ trade for R33 suspension bits (soild pineapples, hicas lock, adjust. camber arms, etc etc Or things of interests)

Genuine Watanabe's 16"x7/8 5x114.3, had them on the rear of my r33 for a few days for fun. resprayed them in bronze. only evident damge is a little flaking from old paint which i didnt fill up, and a few small scratches here and there...NO DINGS OR SCRAPES! been sitting in my room for over a year as a display so i think should be out for the world to see now. $700 no tyres. can arrange some tyres as well if required.

also have som stock engine parts like cams, cam gears, intake manifold, injectors, fuel rail etc for sale as well so just post up what you need and i'll see if still got it..

will have bits and pieces up here soon

call me 0432 315 780 after 5.30pm weekdays or anytime weekends, or PM here (i check daily)

I CAN ARRANGE FREIGHT IF NEEDED! parts listed would not be more than $20 freight (the 86 setup would be abit more) so let me know exactly where its going to be sent to if required.

cheers

Dom

Edited by bloodsword27

Image030.jpg

will be uploading more up later tonight. these are GENUINE! has the circular emblem with 3doves within. offset is about +38 and has about an inch of polished lip/dish on each. clears r33 rear brakes easy, front needs roughly 10mm spacers.

Image033.jpg

castor rods. one is a little soft but doesnt affect driveabiulty or wateva u wanna call it. selling to clear up space and need money (dont we all)

100_0202.jpg

NEWLY ADDED! Genuine 180sx TYPE X WING~

yellow in colour, the spoiler is actually straight and flat, not bubbly and uneven like alot of copies. only has a slight paint crack near the part where spoiler meets the stand thingo and couple of small scratches from storage. $200 selling due to lack of space.

Image033-1.jpg

Greddy electrical gauges.

i have - Water temp

- Oil temp

- Oil pressure (missing sender)

- Boost (looks as though previous owner took face off before ;) dont know why)

all gauges come with genuine senders and wiring. all in excellent condition with scratchless faces except a few scratches from inserting into gauge holder/mounts. i have never had a chance to install any of these because ended up sticking with my HKS and Apexi gauges. $150 each or $400 the lot.

update:

also for sale now is a BRAND NEW FRONT BRAKE PADS. these are genuine STi pads yes yes i know its subaru but i have checked the code and guess wat? you can use them for cars on the following list according to the bendix site (go the 4pot nissans!):

db1170.jpg

db1170-1.jpg

chasing $150 for thes ehigh performance pads.

more pics of the watanabe's

watanabe2.jpg

watanabe1.jpg

some more info on the rims as well.

-front wheels are approx 128mm from inner side of hub to inner wheel mounting edge, recently had 8" semi slicks fitted.

-rear wheels are approx 158mm from inner side of hub to inner wheel mounting edge, currently has 9" semi slicks fitted.

any more questions keep them posting...

PEOPLE I MUST SELL THE RIMS TODAY! PICKUP PREFERED FOR THE CASH...GIVE ME A DECENT OFFER!!!!!

Watanabe's sold! thanks Jeff!

Castor Rods sold!

type X wing- pending payment...

gauges and R33 front discs and pads still available!

  • 2 weeks later...

bump..rear discs still available, myt find some other random stuff to sell as well very soon!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...