Jump to content
SAU Community

Recommended Posts

This is an excerpt from the G35 2003 ESM that also applies to the V35.

It outlines what maintenance and preventative inspections are recommended to be performed and at what intervals.

ma1.pdf

Edited by -= SKiZO =-
Link to comment
https://www.sau.com.au/forums/topic/173808-maintenance-schedule-for-the-v35/
Share on other sites

No worries, not sure if many know about this new v35 forum though so maybe we need to advertise! From the time I decided to change cars till i actually got it in my hands was about 6 months, so spent that time researching as much as a i could, i guess in a way to confirm that I really wanted this car. But so glad I did get it. I get the info from lots of places but alot of it comes from g35driver and the US guys have been really helpful.

  • 3 weeks later...

There is a folder on g35driver.com with the whole manual. This is the link for people to download:

2003-2004 G35 Coupe BOTH Automatic and MT Transmission

http://rice.sightless.net/03-04coupe.zip

2005-2006 G35 Coupe BOTH Automatic and MT Transmission

http://rice.sightless.net/05-06coupe.zip

  • 1 year later...
My maintenance is due and read the guidebook. It says to replace the in-cabin microfilter. Sounds like it is unnecessary. Has anyone ever replaced it?

changed mine last year. you can get it from a nissan dealership for around $110 and replace it yourself - it's a pain to do it though as you have to remove a lot to get to it. it's way cheaper if you can get it from the US, i think it worked out to be about A$25 including shipping to a US address. not really necessary to replace it but it can get quite dirty after a while and a dirty filter can give off a bad smell when you switch on the aircon.

There is a folder on g35driver.com with the whole manual. This is the link for people to download:

2003-2004 G35 Coupe BOTH Automatic and MT Transmission

http://rice.sightless.net/03-04coupe.zip

2005-2006 G35 Coupe BOTH Automatic and MT Transmission

http://rice.sightless.net/05-06coupe.zip

I know it is a little old but those files do not work, is there any chance that you can update them...

Perhaps if you have a copy of them you could upload to www.megaupload.com, it is free for basic use!

Would be a great help if you can assist.

changed mine last year. you can get it from a nissan dealership for around $110 and replace it yourself - it's a pain to do it though as you have to remove a lot to get to it. it's way cheaper if you can get it from the US, i think it worked out to be about A$25 including shipping to a US address. not really necessary to replace it but it can get quite dirty after a while and a dirty filter can give off a bad smell when you switch on the aircon.

They get really dirty quickly and clean air is so lovely. There are normally pictures of how they look at Nissan Delearships, they are not unlike a standard paper filter but they are treated for microbiological contaminent particle trapping.

I know it is a little old but those files do not work, is there any chance that you can update them...

Perhaps if you have a copy of them you could upload to www.megaupload.com, it is free for basic use!

Would be a great help if you can assist.

I took a look quickly at G35 and there is a link to a website that you can download lots of different manuals, unsure of the actual quality as I am still downloading.

This is the site and everyone should take a look...

http://psedog.com/cars/fsm/g35/coupe/

Use the links on the side for different cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...