Jump to content
SAU Community

Recommended Posts

All items are in Zillmere, Brisbane.

Smaller items can be posted via express post ($10 - $15 for Express Post)

Larger items pick-up only.

PM for more info or call 0412 256676

4 x 180SX stock rims (4x114.3mm) with 195 55 r 15 snow tyres (no pics) $100

4x R32 rims with 2 good tyres and two bald tyres (no pics) $200 $180

R33 GTS-T 2 door stock cat back exhaust - good condition (no pics) $150 $130

R33 GTS-T 2 door stock front and rear struts & springs, no top mount (just replace with the mounts from your old shocks) - good condition $200 $180

01030024.JPG

01030025.JPG

R33 GTS-T 2 door stock springs (front and back) - good condition $50 $30

01030023.JPG

R34 GTT centre wheel caps (series one - silver) - Excellent Condition $150 $120

01030033.JPG

R34 GTT instrument cluster manual (km's unknow). No clear cover - good condition $100 $90

01030031.JPG

R33 GST-T stock air box - good condition $80 $70

01030017.JPG

R34 GTT stock air box with snorkle - good condition $100 $80

01030015.JPG

Stagea RS Four Series 2 auto (not tiptronic) instrument cluster - good condition (clear cover has some scratches) $50 $40

01030030.JPG

4 x R32 GST-T stock 16" wheels with 215 50 R16 tyres (around 50% tread left) - good condition some very very minor scratches $250 $230

01030006.JPG

4 x Stagea RS Four Series II stock 16" wheels - bald tyres - good condition some scratches $150 $130

01030001.JPG

4 x Nankang 225 60 R16 tyres - 99% tread left. Suit Commodore $250

01030002.JPG

01030004.JPG

#1 R33 Floor mats $60 $50

01030026.JPG

#2 R33 Floor mats $60 $50

01030027.JPG

#3 R33 Floor mats $40 $30

01030028.JPG

#4 R33 Floor mats - very good condition. Driver's mat needs a clean but is in good condition. $80 $60

01030029.JPG

R33 Series I dashboard surround - dirty, scratches and a small crack. All buttons, switches and vents in excellent condition- as pictured $50 $40

01030022.JPG

Kakimoto R32 cat-back stainless steel exhaust - very good condition $400 - SOLD

01230014.JPG

R33 Series I shift boot and plastic gear stick surround thing. Suits repaint - dirty and scratches - as pictured $15 $10

01030021.JPG

R33 climate control unit - works fine but missing button $20 $15

01030034.JPG

Edited by RiGo

how the f**kuc is that pissible, 4 sets of R33 mats, and non of them are the ones i need. Any chance you have a PROPER driver one, from the set that has the odd one.

Set #4 is pretty good. The driver's side is just dirty. It'll come up nicely with a bit of elbow grease.

how the f**kuc is that pissible, 4 sets of R33 mats, and non of them are the ones i need. Any chance you have a PROPER driver one, from the set that has the odd one.
how the f**kuc is that pissible, 4 sets of R33 mats, and non of them are the ones i need. Any chance you have a PROPER driver one, from the set that has the odd one.

wat u mean not proper? isnt that a complete set of mats there (at least three of them)? interested in a set actually. how much to freight to sydney 2170 for a set?

Sorry i mean i have a set, the one with the odd driver side one, but mine is missing the driver side, my set was brand new, but so bastard floged the driver side in transit. No offense, the sents are fine, i am only after the driver side one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
    • hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...