Jump to content
SAU Community

Recommended Posts

I have HKS coilovers in my car, but don't know the model, whether it is dampening adjustable, camber adj, whether it has poillow tops.

Where can i go to check which of these it does have, and what brand these are?

Also, can you "service" coilovers rather than sourcing new ones?

How much does this cost?

And it has these turning knobs above the rear parcel shelf. What the hell are these???

I only had springs in my old car...so new to coilovers.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/174503-how-to-check-coilovers/
Share on other sites

I have HKS coilovers in my car, but don't know the model, whether it is dampening adjustable, camber adj, whether it has poillow tops.

Where can i go to check which of these it does have, and what brand these are?

Also, can you "service" coilovers rather than sourcing new ones?

How much does this cost?

And it has these turning knobs above the rear parcel shelf. What the hell are these???

I only had springs in my old car...so new to coilovers.

Thanks!

usually dampening force is adjustable via turning pegs on the tops of coilovers. somethimes they are marked with lines and numbers. if you see something like this then they are probably adjustable for dampening force.

I have HKS coilovers in my car, but don't know the model, whether it is dampening adjustable, camber adj, whether it has poillow tops.

Where can i go to check which of these it does have, and what brand these are?

Also, can you "service" coilovers rather than sourcing new ones?

How much does this cost?

And it has these turning knobs above the rear parcel shelf. What the hell are these???

I only had springs in my old car...so new to coilovers.

Thanks!

yeah... this knob u talkign about is ur damper adjustment. Click them all to zero (anti-clockwise) then click them all to say 10 and make sure they even or will ride like crap.

As for camber/pillowball tops. Camber tops are only available in Macpherson strut desings. Skyline does not have this (silvias do). You probably do however have pillowball tops (metal tops) Look under your bonnet at your coilovers.. or through the parcel shelf and there should be metal around that "knob" its probably purple/pink if its HKS. If you have this metal then congradulations u have pillowball tops. Realy only advantage of these are its a bit stiffer then the standard rubber/plastic tops.

Also if you jack your car up and take your wheel off and look at ur coilovers you will see a seat below the ring.. it is two seats holding the spring up. If you dont have any "C" Spanners then get a screwdriver and hammer and u can loosen them by turning them and adjust the height of the car. But make sure you clean all the threads befor you go doing this or they will seize up and get stuck.

As for servicing coilovers yes, yes you can have them serviced and it is approx $100-$150 each. Only do it if needed

cheers

Edited by choku_dori

bought my car prob 10 months ago and have always thought the coilovers are too loud....always wanted the to be checked out, can say pedders or beaurepairs look at them to check they are still safe?

always thinking im gonna loose a wheel or something....

You probably do however have pillowball tops (metal tops) Look under your bonnet at your coilovers.. or through the parcel shelf and there should be metal around that "knob" its probably purple/pink if its HKS. If you have this metal then congradulations u have pillowball tops. Realy only advantage of these are its a bit stiffer then the standard rubber/plastic tops.

Slight correction, pillowball tops are not refering to the strut top itself being metal, I havn't seen one that isn't metal yet...

If it referring to the fact that they use a spherical bearing/rose joint/pillow ball to locate the shock shaft to the strut top. For a street car, they provide lots of NVH and wear out quickly, then begin to knock once they start wearing out.

is it normal for coilovers to make clunking sounds from the rear?

like a shitbox with long gone suspension?

Cause mine clunks and rattles alot

Clunking sounds is a sign ur coilovers are way past its used by date. They are probably leaking. You can either get them reconditioned (https://www.shockreco.com) or buy new ones.

Clunking sounds is a sign ur coilovers are way past its used by date. They are probably leaking. You can either get them reconditioned (https://www.shockreco.com) or buy new ones.

Reco is different to being serviced?

servicing = replacing struts, seals, regas etc... = rebuild. Costs around $150 per corner approximately from TSR in Brisbane.

$600 is cheaper than $1600+ so i guess i'll get them serviced

only if they guarantee no more clunking :P

does anyone know where car I get my Tein HR coilovers servicing or rebuild? i'm on the Coast NSW and dont have stock suspension ! do i need my car to put on stands when I do servicing or rebuild?

Cheers

I was talking to EastCoastSuspension.

And they said they can't service my coilovers (HKS) as it's imported...

Anyone know who can service HKS?

And as for u subie, i think fulcrum can service yours.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...