Jump to content
SAU Community

Recommended Posts

What mods are done to the car?

Has it been worked on recently?

How long have you owned the car for, or have you just bought it?

When your driving, when is it losing boost? What RPM?

Does it bog down?

Its hard to diagnose problems over the internet. Being specific to all the details is a must :)

Link to comment
https://www.sau.com.au/forums/topic/174525-symptoms/#findComment-3202483
Share on other sites

oh my bad, umm theres a funny rattle sound come from either the engine bay or around there when i turn the car on, but it goes away? and also im loosing boost?

How many kms has the car done? And whats the oil condition and level like?

Does it only rattle when cold? Is it a rattling sound, or a ticking sound?

Ticking most likely = noisy lifters.

Loud external rattle most likely = exhaust heat shield (if fitted).

First step with the boost problem is to check (and check again) all intake & intercooler piping, and check all vacuum hoses in the engine bay.

Link to comment
https://www.sau.com.au/forums/topic/174525-symptoms/#findComment-3203269
Share on other sites

What mods are done to the car?

Has it been worked on recently?

How long have you owned the car for, or have you just bought it?

When your driving, when is it losing boost? What RPM?

Does it bog down?

Its hard to diagnose problems over the internet. Being specific to all the details is a must :P

ive owned the car for over 4 years now, 94 r33 coupe, mods ive done to my car are, front mount,38mm wastegate, cold air box, HKS spark plugs, hks ssqv, thats pretty much it? it losses boost when over 4000rpm? reading my boost it hesitates and drops when full throttle?

Link to comment
https://www.sau.com.au/forums/topic/174525-symptoms/#findComment-3203545
Share on other sites

How many kms has the car done? And whats the oil condition and level like?

Does it only rattle when cold? Is it a rattling sound, or a ticking sound?

Ticking most likely = noisy lifters.

Loud external rattle most likely = exhaust heat shield (if fitted).

First step with the boost problem is to check (and check again) all intake & intercooler piping, and check all vacuum hoses in the engine bay.

the cars done 139k had oil done last month, its more rattle sound, but it looks like its coming from around from where the belts are?

Link to comment
https://www.sau.com.au/forums/topic/174525-symptoms/#findComment-3203546
Share on other sites

I'd be checking the intercooler hoses first if your losing boost. May be a boost leak.

Yup.. i'd say KeyMaker's right there...

Sounds like it could possibly be two unrelated problems. Check all piping from turbo to throttle body.

Another possibility could be exhaust manifold gasket. Check it for leaks.

Link to comment
https://www.sau.com.au/forums/topic/174525-symptoms/#findComment-3206242
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...