Jump to content
SAU Community

Recommended Posts

hi guys im just in the middle of changing my fuel filter (i got z200 as recommended) and i cant pull the hosing off!... it like its glued or its never been changed at all! tried twisting it but the hosing is starting to crack (corroded a bit from heat)...

can anyone tell me what size hosing it is so i can replace it... that would be great

thanks

8 mm fuel hose i think or is it 6 :S simple take the fuel filter down measure hose and buy, best bet plus the z201 also fits aswell

Cheap and easy and can be bought from super cheap in 1-1.5 meter sections

Good luck

Rule 1: Never work on your own car yourself if it is your only car (i.e. if you can't borrow mum/dad's car etc). It is simply impossible. I take this to the next step, and I have a daily driver.

Whenever I do anything on the car, I usually need something as the thing progresses. Cars are my most favourite thing in the whole world, so I practically have half a workshop worth of parts, but it's still not enough. e.g. I might need a washer or a clamp, or a belt, or hose or something.

In light of this, I find that most of the time wiht the skylines (for other cars, it depends on where the fuel filter is located too), the hose is normally hardened onto the fuel filter. You can probably muck around and use a screwdriver to get it off, but it's still no good - the hose is perished. Doing so will probably spill blood. I normally just slit it, save the hassle. New bit of fuel line might cost you $5-10. Then you know for next time, it'll be easy too.

8 or 6 mm... i will keep that in mind but i guess my best chance of doing it right the first time is to take existing hose off and to go get 1 meter - 1.5 hose

thanks guys

* if anyone is definate on hose size please post... as it will be easier hehe :laughing-smiley-014:

found my left over, Hear (Grommet Rubber - Fuel Hose -8mm (5/16") ) There ya go so its 8 mm and get some clamps as well it doesnt hurt to replace those shitty ones that are already on there

Cheers

A

found my left over, Hear (Grommet Rubber - Fuel Hose -8mm (5/16") ) There ya go so its 8 mm and get some clamps as well it doesnt hurt to replace those shitty ones that are already on there

Cheers

A

thanks for that, will make it easier for me + there is a skline meet in progress i can do my car early and head of to that... thanks again SAU members

well i went down to super cheap and bought a meter of 5/16 (7.9mm) hose and a pack of 2 clamps for my R33 gts-t series 1 RB25t cost me $7.99 for fuel hose and $3.00 for the small hose clamps. You can buy coloured fuel lines by the meter in a packet but it cost $13.99 + colours they had only consisted of red and blue. Hope this helps other... :P

gah, i split my fuel line today trying to get the stupid fuel filter off

racq guy coudlnt even get the fuel filer off the hose when he came and cut it out

it had become one with the hoses

gah, i split my fuel line today trying to get the stupid fuel filter off

racq guy coudlnt even get the fuel filer off the hose when he came and cut it out

it had become one with the hoses

exactly the same prob i had... might i say its a good idea you wear eye protection as today i cut my fuel line and the fuel shot up and it just missed the eye balls!... iv had fuel in my eyes before looking over a carbie after tiping some in and my mate didnt look to see if i had my head out of it... but i think it was a high octane, maybe avgas, as the car was a speedway vehicle... stung a bit :D

you can always relieve pressure next time by, removing fuse or fuel pump plug, start it up it will stall after 2 seconds, or another way is before attempting open the fuel tank cap after its sat a little bit and that will relieve pressure, also undo the bottom on first pull off put a bolt in it and that will stop most of the fuel coming out, then tackle the front, and replace. But there is no way you cannot lose no fuel out.

Glad to help

Cheers

A

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...