Jump to content
SAU Community

Recommended Posts

Hello all,

Organising a meet and movie to see 2 Fast 2 Furious @ Dandy Drive ins on the 21st of June... Lets make this a big one! Tell one tell all.

Gonna follow the plan from the last drive ins cruise so meet at Dandenong Stock Yards @ 6pm, meet & chat then onto the movie @ 7:30 (starts at 8:30 - gates open 1 hour early).

I recommend that people bring food and drink because stuff is quite expensive there (unless Vickii brings us all food again :P).

I will speak to the cops before hand and promise good behaviour in exchange for no trouble. It was fine last time. And from what I have heard there was no trouble at Coburg on opening night.

Let us know if you're coming. Do people need directions again?

Coming so far (assuming cops don't bother us):

- MaXiMuS007 (with his car back)

- HotSky

- DJ_L3ThAL

- MzDeFecTeD

- 32_envy

Interested:

-RedLineGTR

-Al

(P.S. Not hijacking JET-33's gold class nite, but drive ins are cooler so come to both!)

its awesome

the 34 is fkn NUTZ!

even if u ring the cops, it doesnt matter, theyl just say theyl leave u alone and b there in unmarked cars/clothing...take down plates..and send out letters...

especially at dandy...its like a few kms from the illegal drags which they r currently goin double nuttz on and im tippin its a sat nite too..?

hmmmmmmmmmmmmmmmmmmmmmmm

  • 2 weeks later...

Hrmm so is any1 still coming?

The whole point of this for me was to celebrate getting my car back but as that has been delayed i'm not even in the mood to go any more *cry*

Guest
This topic is now closed to further replies.


  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...