Jump to content
SAU Community

Recommended Posts

Just checking if anyone has ever hit their speed limiter in an R33, and what it's like (harsh or gentle). I have been track racing and been getting very close to the 180km/h and wondering how it feels when it kicks in.

And yeah, I know how to disconnect it, just wondering if it's worth doing.

Thanks

D

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/
Share on other sites

there is a wire which u can cut apparently or put a switch in its place. I dont think its worth it unless u are gettin to top speed where u can go more. I just reach under 180 at ippy raceway i dont think ill reach much more but it might be worth doing :P if u want to go fast lol

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-362764
Share on other sites

if you can find a wiring diagram of the computer, its wire number 53!!

The speed limiter is soft, and it appears more closer to 195kph on the speedo. The stock speedo is way out when going that fast.

I have checked it against my RSM.

A switch is the way to go, but not essential. I have had mine up to 240kph so far now...... open road

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-364792
Share on other sites

i've hit my speed limiter before. the car just suddenly nose dives due to the lack of acceleration, but once it drops below 180, it picks up again, and keeps doing this. when i hit it, i just back right off...doesn't feel as harsh as rev limiter, but maybe cos rev limiter's hit in the lower gears.

no such problems now with the power fc

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-368112
Share on other sites

I suppose that disconnecting it would be cool but given the recent news over the haul by police on hooning and the results they have had over the long weekend, in the interests of keeping your car etc. is it possible to disable it for racing and then put it back on for street driving. It appears that cutting a wire seems permanent and was wondering if there is a way of having it so that it can be turned on and off.....anyone know if this is possible?

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-370923
Share on other sites

I can't see the point of having a switch for street and track... No matter where you are (except NT) whether you're doing 175kph or 185kph, you're still doing a bit over the limit :D... It's not like your speed can sneak up on you that high :-)

I have no speed limiter (and the wire 53 isn't cut - interesting, eh...)...

As CMS Drifter said, just install a switch... Dick smith stock them, and they're pretty easy to fit :-)

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-372834
Share on other sites

Its not soo much in relation to how fast the speed catches up with you...rather if you modify your car (eg. take the speed limiter off) and are involved in an accident, even if you pay insurance the insurer may refuse to cover you. This may depend on whether you inform your insurer of the modifications made to the mechanics of the car..which im guessing they would need to / or should know about given how anal they are about items fixed to your car.

Furthermore charges could be applied should you be deemed to have modified the car to an extent that it is unroadworthy and hence driving an unroadworthy and unregistered vehicle which is an offence.

Nevertheless, each to their own....was just something of interest sake i guess more than anything.

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-372962
Share on other sites

Just checking if anyone has ever hit their speed limiter in an R33, and what it's like (harsh or gentle).

yes, your accelerating and all of a sudden you feel the engine stop reving and it feels like you slipped in the clutch it isnt rough or anything, and when you take you foot off the accelerator and the speed srops again you put your foot back on the pedal and it accelerates again :P

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-374110
Share on other sites

"i seriously doubt that any insurance company would go to that extent to prove that it was unroad worthy"

Be careful of that one mate....if an insurance company wants to get out of paying on a claim they will.....seen it often...i work in personal injury (mva etc) and they are harsh. Once the insurer was finished with you....then come the cops...who knows...

Just food for thought really. Just dont want people paying hundreds and hundreds of dollars in insurance and then find that they have made alterations which makes the policy invalid. I guess its best to let them know and find out now if your covered with the "slight" changes rather than getting a nasty shock when you make a claim after a crash.

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-374136
Share on other sites

my car doesnt have a speed limter due to aftermarket ecu... however, if you were to cut the wire the insurance company couldnt not pay out... as it is still road worthy. Prove me wrong and post any ADR's / legislation etc that says a car has to be limited to 180km.

another note is... i wouldnt just cut wire 53. There is a reason why greddy, hks, tomei make speed limit removers... that wire into both wire 53, 59, ground and +..

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-381062
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...