Jump to content
SAU Community

Recommended Posts

Hey Guys, i've got my car up for sale, but i have been asked a couple of times wether i would seperate my new engine/turbo package. So here's the details.

CP Forged Pistons, Eagle Rods, Tomei Metal Head Gasket, All New Nissan Gaskets, Extensive Head Work, Head stud kit, N1 Oil Pump and Collar to suit, N1 Water Pump & Nismo Thermostat, HKS Step 1 Cams, HKS Cam Wheel, Z32 AFM, HKS GTRS Turbo, 555cc Injectors, Bosch Fuel Pump, Split Fire Coils. There is alot more that has gone into it, but this should give you an idea on the kind of quality parts that have been used. For exact specs on head work or any thing else please call me and i can put you in touch with the workshop who built it. I have spoken to many people with a similar setup who have 300rwkw on a sain amount of boost, so that is my aim. The above work/ parts cost me 20K,( with receipts) and has an engineers cert to boot.

Still just running in, so is available to hear/see running in my car. May also negotiate other components from my setup.

Price Looking for $10k + your old motor and turbo (must be running etc)

or $12k outright

post-3771-1183636871_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/175478-complete-built-rb25-800ks-old/
Share on other sites

Have a couple of people interested. But nothing solid yet, so still here waiting for YOU!!!

This is a guaranteed 300KW ATW package. Just ask thizzle on these forums, i've followed very closley followed his formula for sucess......Come get it..... :nyaanyaa:

Hey Guys, i've got my car up for sale, but i have been asked a couple of times wether i would seperate my new engine/turbo package. So here's the details.

CP Forged Pistons, Eagle Rods, Tomei Metal Head Gasket, All New Nissan Gaskets, Extensive Head Work, Head stud kit, N1 Oil Pump and Collar to suit, N1 Water Pump & Nismo Thermostat, HKS Step 1 Cams, HKS Cam Wheel, Z32 AFM, HKS GTRS Turbo, 555cc Injectors, Bosch Fuel Pump, Split Fire Coils. There is alot more that has gone into it, but this should give you an idea on the kind of quality parts that have been used. For exact specs on head work or any thing else please call me and i can put you in touch with the workshop who built it. I have spoken to many people with a similar setup who have 300rwkw on a sain amount of boost, so that is my aim. The above work/ parts cost me 20K,( with receipts) and has an engineers cert to boot.

Still just running in, so is available to hear/see running in my car. May also negotiate other components from my setup.

Price Looking for $10k + your old motor and turbo (must be running etc)

or $12k outright

hey

interested in selling just the bottom end with n1 oil and water pump, tomei head gasket?

send me a msg or call after 5:30 if you like, im keen depending on price

interested to know what price (if seperating) for block and head itself. Dont need injectors, plenum, turbo, coil packs, exhaust manifold.

Thanks

Second that (but I want injectors)

Thanks

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
if you decide to separate, interested in the turbo if it's only done 800k and it's reasonably priced

keen on injectors and splitfires also if only 800 k old and of course the right price.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
×
×
  • Create New...