Jump to content
SAU Community

Nismo 555cc Latency Times For Rb26dett

wolfwood

By wolfwood,
in Engines & Forced Induction

 Share

Recommended Posts

wolfwood Community Regular

wolfwood

Posted
Posted

Hey Guys as the Title Suggests im in Real need of the Exact Latency times of Nismo 555cc.. not 550cc what ever people have posted previously. so if someone is running the sa,me injectors in the RB26DETT and has a power FC can you please tell me the Latency you have set in your Power FC and i Already have the injector pulse correction value (80% i have calulated it to be)

Your help would be greatly appreciated

Ben

R32-PSH77 Enthusiast

R32-PSH77

Posted
Posted

Comon Peep's .. your all telling me no one runs 555cc's and a power fc and can spare 3 seconds to go read there PFC hand controller and let us know the nismo 555cc injector latency times?

We have been at this car for months now.. and we are son close to getting her purring. just need this correct settings as its WAY WAY to rich. could almost put a cup behind the exhaust and collect the fuel lol

Anyone who can spare some time out today and just find out for us. we would be in there debt.

Thanks guys, Adz

Adriano Grand Master

Adriano

Posted
Posted
Comon Peep's .. your all telling me no one runs 555cc's and a power fc and can spare 3 seconds to go read there PFC hand controller and let us know the nismo 555cc injector latency times?

We have been at this car for months now.. and we are son close to getting her purring. just need this correct settings as its WAY WAY to rich. could almost put a cup behind the exhaust and collect the fuel lol

Anyone who can spare some time out today and just find out for us. we would be in there debt.

Thanks guys, Adz

If its runningthat rich, then there is more than the latency time wrong, there are plenty of gtr's running these injectors, which havent had the latency changed from defult.

R32-PSH77 Enthusiast

R32-PSH77

Posted
Posted

Hmm.. this ecu has not been tuned yet guys.. we are just setting up as much as we can before it gets the tune.. just trying to diagnose any problems.. and anything that needs to be sorted before its off to the tuners.

there is no point towing the car all the way to the tuners if we need to get something else installed/modified on the car.

Thnx, Adz

Adriano Grand Master

Adriano

Posted
Posted
Hmm.. this ecu has not been tuned yet guys.. we are just setting up as much as we can before it gets the tune.. just trying to diagnose any problems.. and anything that needs to be sorted before its off to the tuners.

there is no point towing the car all the way to the tuners if we need to get something else installed/modified on the car.

Thnx, Adz

Are you driving it, or is it rich at idle, if so just pull some fuel out of the idle cells, and i would recommend changing your oil(as it will be full of fuel) and towing it to the tuner before you ruin the motor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • MBS206
      NC MX5

      By MBS206 · Posted

      Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Sorry I meant that we are building the EH for a client.
    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...