Jump to content
SAU Community

Recommended Posts

I noticed that the boot was leaking in my Series I R33 GTS25t..there was water in the spare tyre well and also down the side where the jack is kept (left hand side when standing behind the car) but the right had side was pretty much dry..is there any common places that it leaks that i can block up with silicone or something? Any ideas? Cheers.

Link to comment
https://www.sau.com.au/forums/topic/177167-r33-boot-leaking/
Share on other sites

I had this same thing. Was coming in the tail lights. Is there moisture build up in you lights? It will show up most inyou indicators. You can take it off and reseal it. Just don't get the sealant on your paint. Its a real pain to get off

Its definitly not from the spoiler, boot seal and theres no rust at the bottom of the window so it cant be from there..it may be the tail lights because i can see sort of "water marks" where water has been and left trails and dried up at the back of the lights..i might check the window wiper too..how hard is it to change the seal on the window wiper?

I've got an R32 sedan and I found about 5+litres of water in the jack area of my boot :laugh:

I have no idea as to where it's come from. The boot area is all dry, it's just the jack area and the other side.

It's been about a week since I sucked out all the water and it's rained quite a lot down here in Melbourne. I might check later today to see how much water is in there now.

I've got an R32 sedan and I found about 5+litres of water in the jack area of my boot :)

I have no idea as to where it's come from. The boot area is all dry, it's just the jack area and the other side.

It's been about a week since I sucked out all the water and it's rained quite a lot down here in Melbourne. I might check later today to see how much water is in there now.

i had the same problem a while back.

i took out the rubber grommets at the bottom of the sides of the boot and it poured out everywhere :D

i went to the car wash when it was all dry and after washing i found the leak was just under the tail lights. sort of where the boot bends 90 degrees.. (if you get what i mean?)

i got some silicone stuff for metal and went hack.

no more water! :)

Edited by dmr
i had the same problem a while back.

i took out the rubber grommets at the bottom of the sides of the boot and it poured out everywhere :)

i went to the car wash when it was all dry and after washing i found the leak was just under the tail lights. sort of where the boot bends 90 degrees.. (if you get what i mean?)

i got some silicone stuff for metal and went hack.

no more water! :D

I think I know what you're talking about. I remember washing the car awhile back and water used to keep coming out even though I've already dried the car from around the taillight area. I'll try and have a look when I get the time.

Do you have any pictures you can post to show exactly where you're talking about?

Cheers mate.

I think I know what you're talking about. I remember washing the car awhile back and water used to keep coming out even though I've already dried the car from around the taillight area. I'll try and have a look when I get the time.

Do you have any pictures you can post to show exactly where you're talking about?

Cheers mate.

here you go bud. sorry about the bad quality..

post-33759-1185174164_thumb.jpg

ive found a bit in the top of the boot where it also leaks through tho..i checked it thismorning and it seemed to be dripping through there and running down that side pocket..when it dries out ill put sum sikaflex on it an see what happens

  • 2 years later...

I was getting a leak from the boot seals, not the black rubber but the off white sealant on the body work near hydrolic lifting arms that hold the boot up.

Was only getting right hand side leaking but suppose the other side can be the same. The sealant goes hard and cracks. Difficult to see and detect as the leak can change with body temp.

I used to have a leak in my right hand side tail light, followed the DIY here & resealed the lights, however after I did that, water just started to flood the indicator & reverse light area & will eventually overflow to the boot through the opening where you reach to take/replace the light bulbs for the indicator & reverse lights, there seem to be a internal crack somewhere in the light assembly.

So I had to remove the whole tail light assembly again & drilled some holes on the bottom side so the water can just drain through.

Now I got no more leaks :D

So for anyone thinking of taking their tail light assembly out, you might as well drill some holes on the underside of it just in case & you can't really see the holes from the outside anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...