Jump to content
SAU Community

Recommended Posts

WANTED

1x Spitfire coil packs to suit 32 gtst

6x 550cc Injectors to suit 32 gtst

please guys new or second hand.. must be at least good cond.. and working order :D

Needed to make sum more HP for my very near future mods..

WHO CAN HELP ME OUT :bunny:

cheers chris

Splitfire coil packs brand new $545 (Price includes Australia wide delivery) at Sliding Performance

http://www.slidingperformance.com/catalog/...products_id=295

or possibly $515 delivered from same place

http://www.skylinesaustralia.com/forums/in...mp;hl=splitfire

as for injectors depends if you want brand name or just use S5 rx7 550cc injectors or something

Brand new injectors from Sliding Performance

http://www.nissansilvia.com/forums/index.p...howtopic=248832

Have you checked the for sale section on this site?

Splitfire coil packs brand new $545 (Price includes Australia wide delivery) at Sliding Performance

http://www.slidingperformance.com/catalog/...products_id=295

or possibly $515 delivered from same place

http://www.skylinesaustralia.com/forums/in...mp;hl=splitfire

as for injectors depends if you want brand name or just use S5 rx7 550cc injectors or something

Brand new injectors from Sliding Performance

http://www.nissansilvia.com/forums/index.p...howtopic=248832

Have you checked the for sale section on this site?

hey thanks for that yeh havn't really sussed it out too much(traders wise) but i def will.. thanks for that help tho

i have heard about the rx7 s5 injects but then ive heard that they are top feed and been told that rb20's are side feed??

chris

RB25 = side feed.

RB20det = Top feed high impedance injectors. Stock is 270cc.

yea cause wen i looked into it.. i found they were top feed.. and also rx7's were too

got any idea on how much s5 rx7's injects are???

Why do you want rx7 injectors? Is you motor going to require 550cc's? RB26dett (gtr) injectors are drop in, with the resistor pack, and are 440cc's. A lot easier to get ahold of as well.

Why do you want rx7 injectors? Is you motor going to require 550cc's? RB26dett (gtr) injectors are drop in, with the resistor pack, and are 440cc's. A lot easier to get ahold of as well.

yer prob can go with 440's but cant be f*ked with resistor pack.. u kno of any for sale?? will be making anywhere from 250-300kw and rx7's mite be cheaper and stright swapsies :yes:

Check this out... (My GTS4) :yes:

RB20DET Injector Upgrade - Page 1

After all the work to create the ultimate RB20 Intake to suit the R33 Intercooler, I thought that now might be a good time to install the Mazda RX7 550cc injectors.

http://www.turboclub.com/turbocars/nissan/...grade/index.htm

Check this out... (My GTS4) :D

RB20DET Injector Upgrade - Page 1

After all the work to create the ultimate RB20 Intake to suit the R33 Intercooler, I thought that now might be a good time to install the Mazda RX7 550cc injectors.

http://www.turboclub.com/turbocars/nissan/...grade/index.htm

wasnt anything there after story about u blowing ur radiator pipes.. nothing about the injector upgrade???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...