Jump to content
SAU Community

Recommended Posts

Wrecking my R32 GTS4 89 model.

Hit a gutter and screwed up underneath the front end of the car. Do not ask if it can be repaired as its not worth it.

I would rather sell as whole cause i really cant be bothered - $4000.

Main parts im willing to sell are as follows, however, there are many other small parts just tell me what u need.

Im located in Bonogin on the gold coast. I am prepared to take some of the shit off myself but most of the shit u will need to organise yourself.

* RB20 - 70,000 ks - would prefer to sell with gearbox, wiring, turbo, etc. Will sell with stock cooler for $2000 o.n.o. or $2300 with front mount kit.

* Blitz SBC spec s electronic boost controller $300.

* Blitz pod - $80.

* Rear tail lights - make an offer.

* Interior - make an offer - slight bubble in dash (will remove if someone is interested).... slight damage on drivers side seat. Everything else is good.

* Rims - like the ones in the picture, however i have another complete set which are basically brand new with tyres (Front 90% Back 60%). $1000.

* LSD - make an offer.

* Windows - front has a crack. all the rest are good. make an offer.

* Bonnet - make an offer.

If you need anything else let me know and make an offer. pics are below.

cheers.

post-17979-1185864073_thumb.jpg

post-17979-1185864106_thumb.jpg

post-17979-1185864141_thumb.jpg

post-17979-1185864176_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/178854-wreckin-r32-gts4-or-sell-as-whole/
Share on other sites

Wrecking my R32 GTS4 89 model.

Hit a gutter and screwed up underneath the front end of the car. Do not ask if it can be repaired as its not worth it.

I would rather sell as whole cause i really cant be bothered - $4000.

Main parts im willing to sell are as follows, however, there are many other small parts just tell me what u need.

Im located in Bonogin on the gold coast. I am prepared to take some of the shit off myself but most of the shit u will need to organise yourself.

* RB20 - 70,000 ks - would prefer to sell with gearbox, wiring, turbo, etc. Will sell with stock cooler for $2000 o.n.o. or $2300 with front mount kit.

* Blitz SBC spec s electronic boost controller $300.

* Blitz pod - $80.

* Rear tail lights - make an offer.

* Interior - make an offer - slight bubble in dash (will remove if someone is interested).... slight damage on drivers side seat. Everything else is good.

* Rims - like the ones in the picture, however i have another complete set which are basically brand new with tyres (Front 90% Back 60%). $1000.

* LSD - make an offer.

* Windows - front has a crack. all the rest are good. make an offer.

* Bonnet - make an offer.

If you need anything else let me know and make an offer. pics are below.

cheers.

post-17979-1185864073_thumb.jpg

post-17979-1185864106_thumb.jpg

post-17979-1185864141_thumb.jpg

post-17979-1185864176_thumb.jpg

hey buddy

Just wondering if you have the standard airbox and snorkel for r32gts-t

cheers

  • 3 weeks later...
  • 3 months later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...