Jump to content
SAU Community

Recommended Posts

I'm taking my car back to standard and will be selling it. The following is a list of things that I will be taking off.

Full leather interior minus front seats(mint condition as noone sits in the rear due to roll cage). Offers + original parts.

Sparco bucket seats - pair (red in colour-mint condition). Trade for standard seats. Must be in good condition though.

2 sets of 2" sparco 4point race harness + shoulder pads. As new. Black in colour. $250 for both. **On offer from Sydney Buyer**

Apexi RSM. Older style with speed cut defender, quarter mile, lap times and heaps of other features. $200.

Nismo shocks and lowered heavy duty springs. Damper adjustable. Offers + trade for original suspension.

Full Safety 21 roll cage + padding. $750.

HKS 550 injectors. $600 + trade for originals. SOLD

Apexi PowerFC for R32/33. $1000 + trade for original. SOLD

Apexi Multichecker (very hard to find and has many features). $450.

Apexi airfilterkit + chrome piping kit. $250 + exchange for original. Also have the Z32 Air flow sensors + wiring. $600 (for both - will not separate) or $400 + exchange. SOLD

Aluminium aftermarket radiator. $450 + exchange for original. **On offer from QLD Buyer**

Custom 3 1/2" exhaust system from cat back. N1 style (angled tip). $600 + trade for original system.

3" high flow cat. $200 + exchange for original

Complete Trust T88 turbo set-up. Includes T88-33d turbo, Stainless steel trust manafold, trust wastegate, trust front pipe, all piping, lines and clips and seals. Absolutley complete ready to go into any R32/R33GTR. Turbo has been checked and is in very good condition. $4000 or $3200 + trade for original turbo setup.

Trust drag intercooler, polished and very tidy (fins all straight). $1550 or $1000 + trade for original (only if in good condition). **On offer from QLD Buyer**

Custom intercooler piping. Polished + new blue samco seals. Also has BOV piping attachment. $400 + trade for original.

Momo steering wheel + boss kit. Trade for original.

Heaps of gauges:

Apexi Boost, Oil temp, Water temp, Fuel temp, Vacuum, 5" tacho (revs to 12,000 RPM) with shift light. Water temp needs to trade with original radiator hose pipe as the sensor needs a custom made fitting. Offers on all of these pls. **Boost, Water and Oil temp gauges are now on offer from Sydney buyer**

Full veilside (original bodykit - Black). Will trade for original kit. **On offer from Sydney buyer**

Autometer fuel ratio gauge. Offers. **On Offer**

Would like to trade all of these parts to another GTR if someone wishes to do swap + cash. Even trade with another car subject to your car's condition. All parts are in excellent condition.

Car is also for sale. Its a black 1992 model. 55kms. Car is one of the cleanest ones you will see. Currently sitting in the workshop at ADVAN (a little dirty from workshop dust but there is not even a dent in the car and the paint job is original). This car was a grade 4.5 when purchased from auction in japan. Been in country for 18mths. Looking for $31,500 ono. Pls no time wasters as car needs to be sold ASAP due to upgrade.

Most parts are still on car at the moment. If anyone needs to COD then the earliest I can do them is tuesday next week as I will take all gauges and other bits and pieces out on Monday. Intercooler, Exhaust, Cat and turbo kit ready to go now.

I'm in Sydney. Call 0416 198 298 if interested in any of these parts or the whole car.

Link to comment
https://www.sau.com.au/forums/topic/17900-heaps-performance-parts-for-gtr-fs/
Share on other sites

Prank..............Call me anytime to arrange to look at the stuff.

Raza...............No its the older style one. Very similar in functions.

Turboalfa........Depends which ones your after. The Boost, Oil temp and water temp gauges are the new style ones. They need to run off the control unit. I would rather sell these together with the unit. For all three + the unit I'd like close to $750. These are nearly brand new. You can view them If you like. They are all in the car at ADVAN. The exhaust temp is the older style one and is electronic. Would like $200 for it. The vacuum gauge is hard to find. Its the older style one as well and is mechanical. Looking for $170 for it. The 5" apexi tacho and shift light I would like $490 for it (still deciding wether I'll sell this one). Fuel ratio is Autometer (carbon fibre one) and would like $80 for it. All gauges are in as new condition. Anyone interested in having a look pls call me to arrange to see all of these in the car (Looks like the cotpit of a plain - seriously).

Joe.

Joe

What are the dimensions of the intercooler? Also be interested in how well it fits and if it can use the standard intercooler piping. What model is it too?

Cheers

Brendan

Dimensions of cooler are 292 x 600 x 115. I don't know what you mean by what model but it will bolt straight onto the standard intercooler pipes on R33/R33GTR. Not sure about R34GTR? You will need to shave a small amount of the front support bar to sit it in due to its thickness.

Joe

***Pls no more SMS. I've sent a shit load of replies and its starting to bug me just a little. If your interested in something pls call me or PM me and I'll promptly return your PM's***

Your cooperation would be much appreciated.

Thanks..........Joe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...