Jump to content
SAU Community

Recommended Posts

Hey guys,

Just got back to Cairns, keen to do a cruise with who ever is keen. Normally go up the kuranda range, via mareeba, stop at mt molloy for a burger, down the julatten range, then cap cook highway. Normally takes the good part of a day but some decent roads. Not sure when, I'm up for another 3 weeks just thought i'd suss out who was keen.

I'm up in Cairns - sorry, with a hire car after a plane flight - on the Easter weekend.

Up to see some rellies.

But I will take note of that route of yours jnb, and try it out.

The hire car will make me go like a granny!

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Guys need some ideas on where to go for a tune...? Spent wayy to much money on my car lately and the final step is the tune. She'll be running great after that. Anyone have any opinions on decent places to go?

  • 3 weeks later...
  • 4 weeks later...

Im wanting to sell my turbo.

It is an HKS 2535. A bit more power over standard with very similar boost response.

Direct bolt on to R32 and R33 , im pretty sure it will fit R34 aswell.

Its still attached to my car, so I can take you for a spin to see what its like.

As comparison, a stock R33 will make about 130kw atw, and R34 GTT stock will make about the 150kw mark.
The turbo on my car makes 180kw atw on only 10psi.

Nothing wrong with the turbo, just chasing more power now.
Be warned however, with stock injectors you will be able to run only about 10-12psi.

Possibly even maxing out your AFM.

I can help fit the turbo on to your car aswell, and change injectors if you have them.

$1000 for SAU

  • 3 months later...
  • 1 month later...
  • 4 weeks later...

Guys need some ideas on where to go for a tune...? Spent wayy to much money on my car lately and the final step is the tune. She'll be running great after that. Anyone have any opinions on decent places to go?

Hey guys, any opinions on tuners in the Cairns area?

Cheers

  • 2 weeks later...
  • 2 months later...

Hey guys, any opinions on tuners in the Cairns area?

Cheers

I'm after the same info. I hear SVS is good but expensive.

I've got an R32 GTR.

Just bought a truck load of parts from Japan. HKS GTSS turbo's, Tomei Poncams, HKS dumps, front pipe, cat, cat back, and a few other goodies. I'm just waiting for a Power FC and a Tomei manifold and I want to get all of this bolted on and tuned.

Anyone dealt with SVS or know any other decent tuners in Cairns?

I do my own tuning, but when I need dyno time, Cameron at SVS is the gun tuner for skylines up here.

The other place up here with an AWD dyno dropped a friends EVO8 off the side a little over a year ago, and then tried to repair the damage on the cheap. (exhaust and tank damage)

Other offerings are single roller dynos. I've heard neither good or bad reports about their capabilities though. Its really hard to trust people's opinions up here too. Seems 1/2 the people in the car scene up here are full of a mix of dreams, second hand information and BS.

Cheers Ian,

Thanks for the info.

That EVO8 horror story is my worst nightmare. I hear you about the car scene in Cairns. I'm just after a responsive, reliable GTR. Not chasing big dyno numbers like most other people these days.

Are there ever any meets up here? Seems pretty quiet.

Edited by GOJ1RA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...