Jump to content
SAU Community

Recommended Posts

hey im after a eboost solenoid because when i got mine removed from japco they never gave it back to me!! just realised now when i went to look at my eboost!

now im wondering wat else they didnt give back!!!!

cheers

Link to comment
https://www.sau.com.au/forums/topic/179237-need-a-eboost-solenoid/
Share on other sites

this was around 18 months ago but they will still have them

its a mac solenoid, but just search for MAC products and there is a place in australia that sells them, i sourced mine from a place in victoria which i found on the net, can't remember their name, they were in ringwood,

possibly these guys www.pneutech.com.au

my boost controller is one of those HYBRID 2 or 3 stage things... simple but the solenoid holds like a f*kn pitty holding a cat

i noticed the solenoid is the same as the e-boost one, and the apexi one. just got their own logos/colouring on them

so try and sus the part number out for that solenoid and you should be ok, when i shorted my solenoid out i needed to buy another one, just the actuator was faulty so i payed around $35 delivered for it...

the whole thing like i said is around $50 - $60

Honestly i dont think going to consumer affairs will really help you because you can't really prove that they took it off you, i think your better off cutting your losses and trying to source one somewhere else

But how ever you go about it, good luck getting one :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...