Jump to content
SAU Community

Recommended Posts

  • Replies 274
  • Created
  • Last Reply

Top Posters In This Topic

I hope that someone is organising licence's on the day because I dont have CAMS licence, Im not a NSW Member and Ive already paid $110.00 for the day... I would be very unhappy if I couldnt take part because I dont have a CAMS licence.

This might sound ignorant but I have been to the Sutton Driver training centre several times and never been asked for a competition licence before, so why now?

How come the information on licences and regulations for the event werent in the original post, why are we only finding out now?

Bullet32,

As stated in my pm. You may have only used the skidpans which is a non speed event and doesn't require a license.

Unlike with the SAU Texikhana will be using the back track on sutton road which does require a license.

Quick ?? If my 33 isn't ready in time, can I swap cars at the last minute??? Just not sure which car to put on the entry form!

I guess you could put both. The car doesn't really matter as much as the driver.

Thanks for the PM guys, I'll pay for a lisence on the day...

I was worried for a minute there cos Im really looking forward to this event. ;)

PS. I understand now how much you guys are putting in to organising this event and its much appreciated.... Thanks guys :thumbsup:

Edited by Bullet32

Guys,

http://australianautosportalliance.com/aas...9&Itemid=45

Please goto the above link, print and download and bring $50.00 for the licence. this lasts a year and you are not required to be a member of a car club.

This licence lasts a year, and can be used at other Texi's (if we do them :thumbsup: ) and Wakefield Park also

Once again, sorry for the confusion everyoneand lets hope that this day is a great day and we can all learn and grow for the next rounds ;)

Cheers,

Chris

v s p e c - if you plan on being around SAU, the SAU NSW club membership and CAMS L2S is the way to go - so you did well anyway :P

I'll be making the most of them hopefully.

Was watching some of sams footage of DECA. Looks like tons of fun.

Any one got a spare 2 way for this event? Lol

Also where did everyone get their helmets from?

Yep being an L2S holder is prob best so dont worry :P

For cheap helmets go to Sydney City Motorcycles, i got mine there for like $70 or $80 or something - its not pretty, but i make it look good

I guess you could put both. The car doesn't really matter as much as the driver.

Sweet... I bought a new car which i am picking up Friday... Il wait till I have all the details for it before I fill in the form etc....




  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...