Jump to content
SAU Community

Recommended Posts

Hey guys, just interested in what sort of times most of you n/a owners out there are pulling. My bro has a r33 gts and i just think his is an absolute freak of a skyline (theres a fair bit a driver skill involved, he really knows his car), but there hasnt been a stock n/a skyline that has beaten him and its pretty common for him to knock off stockish s13,s14,15,r32,r33 etc etc. So im keen to see what times in particular stockish r33's are pulling (no nos), but anyother n/a skyline owners that would like to share that would be good reading aswell. So i'll just give you the run down on my bros car and if you can follow a simular format that would make things easy to keep track.

thanks :P

Car: R33 Skyline GTS series 1

Transmission: Manual

Mods: Cold air, catback 2.5in exhaust, lots of timing

Tyres: 245/45

Track: Kwinana Motorplex

1/4 Mile time: 14.6

60foot time: 2.0

Edited by R34GTFOUR
Link to comment
https://www.sau.com.au/forums/topic/179982-na-14-mile-performance/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Im finding that very very hard to believe.. 245's are also very big tyres for an NA 33 to turn.. would like to see i time slip, MPH, air temp and RA, see sig for qtr times..

Edited by NA_R33

i dont have a timeslip but i can do you one better, i've uploaded the footage onto youtube i'll put a link in the next post cause i'm waiting for it to finish "processing" as it says on youtube

The car is definately running 245 wide tyres but they barely fit on his rims, the tyre fitter told him that he shouldnt really fit them and if they pop off he wasnt to be held liable lol, thats confidence for ya

I have no doubt there are freak cars out there and have a very good understanding of how and y it occurs. My car had headers, Tune, as mush timing as it would take custom cold air... When HPI did the NA supra Vs. Skyline Article the test drivers couldnt better a 15.7, A blueprinted engine with the same mods is not going to run over a second faster, especially with heavy rims and tyres...

Does the car run these times consistantly, or was it a timing glitch?

the car has run lots of 14 seconds passes, and has run 14.6 on three seperate occasions, with the quickest being the 14.60 on the video.

Theres nothing special about this car mod wise, stock motor, ecu etc etc, the only things changed is the igntion timing, cold air and a catback.

I just think it is a freak, every now and then you run into a stock car that does things it shouldnt.

So noone else here has cracked a 14s pass on the stock n/a?

sure your brother doesnt have a GTST?

hahaha no, its a stock gts. No turbo, no nos, no nothing. You can hear it in the video, its got the n/a exhaust tone.

There was a guy in a white 33 gtst on the same night running power fc, fmic, full zorst and i think boost around 12psi on the stock turbo and the best he got on the night was a 14.6 aswell hahaha, examples of people who can and cant drive.

On a side note, my bro has no mechanical sympathy, hes the type of guy that can just belt a car all day long, years on end and nothing will break lol lucky bastard

i've been mucking around with cars for a few years now and i can definately tell you this motor is stock, no "blue printing" no reground cams no aftermarket computer it is completely STOCK besides the mods i listed. And if anyone would know, my bro who has been a mechanic for quite a while now would know.

The car pulled 123rwhp and once again youtube will verify this once it has been uploaded woooohooo ;) (you will notice abit of smoke after the pull, good old piston blow-by lol)

This was done with a blocked cat, and the cat was replaced before the drags, which would of added around another 10hp i would say

if you can get a hold of a dyno graph that would be sweet.

simply put.. 120RWHP (90ish RWKW), does not equate to a mid-14 quarter mile in a full weight r33.

there must be a reason for it... and i'd like to find out and do whatever it is for myself ;)

that seems ways to quick the best i could get was a couple of 15.4/15.5s with mine when it was na and had a few bolt on's, you sure theres no flywheel drivline tranny diff mods?? i cant believe a stock na would be able to pull that time theres got to be something to.

is the ecu been modded??

okay, i'll just give you a quick run down with the dyno run cause its not a true indicator of the real power.

That dyno is extremely harsh for power readings, when my celica had a stock turbo on it it pulled 205fwhp on that dyno and i pulled a 13.3 down the quarter which didnt really reflect its power, so i went to a different dyno and pulled 267fwhp with the same mods. Now with that in mind, when that dyno run was down the car was having trouble beating my other bros twin cam corolla, but as soon as the cat was fixed he chopped it. So i would expect around 150ish hp on a "normal" dyno.

Once again, this car is STOCK STOCK STOCK STOCK STOCK. No ecu upgrades, No cams, the motor has not been touched besides the regular oil changes and timing belt. No lighten flywheel, it has a stock clutch, with stock lsd diff, and no super dooper carbon tailshaft. My bro has owned this car for about 8 years now and bought it from a car yard that imported it direct from japan and it was completely standard (standard intake, exhaust etc).

Simple things help to get this time, like he is one very harsh driver, the gearbox crunches every gear in daily driving but he still belts the shit out of it.

Fuel light is always on when he races to help save weight, same with the spare tyre and jack etc for the same reason. Theres heaps of little things you can do to help which seems like common sense but i constantly see cars go down with a full tank of fuel and i just shake my head, thats an extra 50kg that could of easily been taken off.

The main reason i started this thread was to see what times a stock skyline should pull cause i definately know his is a freak, pure and simple, i just didnt know that he was on average a second quicker than what the benchmark is. It maybe hard to believe, but like i said before it is stock

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...